manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Руководство по продукции, Страница: 675 / 698

Поделиться
Скачать
Motorola AP 5131 - Wireless Access Point Скачать руководство пользователя страница 675

Usage Scenarios

B-9

B.1.2.2 BootP Priorities

The following flowchart displays the priorities used by the access point when the BootP server is 
configured for multiple options:

If the BootP Server is configured for options 186 and 66 (to assign TFTP server IP addresses) the 
access point uses the IP address configured for option 186. Similarly, if the BootP Server is configured 
for options 188 and 129 (for the configuration file) the AP uses the file name configured for option 188. 

B.2 Configuring an IPSEC Tunnel and VPN FAQs

The access point has the capability to create a tunnel between an access point and a VPN endpoint. 
The access point can also create a tunnel from one access point to another access point.

The following instruction assumes the reader is familiar with basic IPSEC and VPN terminology and 
technology.

•

Configuring a VPN Tunnel Between Two Access Points

•

Configuring a Cisco VPN Device

NOTE

If the firmware files are the same, the firmware will not get updated. If 
the configuration file name matches the last used configuration file on the 
access point or if the configuration file versions are the same, the access 
point configuration will not get updated. The LAN Port needs to be 
configured as a BootP client. There's no BootP support on the WAN Port. 
The WAN supports only DHCP.

Содержание AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов