manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Руководство по продукции, Страница: 62 / 698

Поделиться
Скачать
Motorola AP 5131 - Wireless Access Point Скачать руководство пользователя страница 62

AP-51xx Access Point Product Reference Guide

2-18

4.

Cable the AP-5131 using either the Power Injector solution or an approved line cord and 
power supply.

For Power Injector installations:

a. Connect a RJ-45 Ethernet cable between the network data supply (host) and the Power 

Injector 

Data In 

connector.

b. Connect a RJ-45 Ethernet cable between the Power Injector 

Data & Power Out 

connector and the AP-5131 LAN port. 

c. Ensure the cable length from the Ethernet source (host) to the Power Injector and 

AP-5131 does not exceed 100 meters (333 ft). The Power Injector has no On/Off power 
switch. The Power Injector receives power as soon as AC power is applied. For more 
information on using the Power Injector, see 

Power Injector and Power Tap Systems on 

page 2-10

.

For standard 48-Volt Power Adapter (Part No. 50-14000-243R) and line cord installations:

a. Connect RJ-45 Ethernet cable between the network data supply (host) and the AP-5131 

LAN port.

b. Verify the power adapter is correctly rated according the country of operation.

c. Connect the power supply line cord to the power adapter.

d. Attach the power adapter cable into the power connector on the AP-5131.

e. Plug the power adapter into an outlet.

5.

Verify the behavior of the AP-5131 LEDs. For more information, see 

AP-5131 LED Indicators 

on page 2-23

.

6.

Align the bottom of the ceiling T-bar with the back of the AP-5131.

CAUTION

Both the Dual and Single Radio model AP-5131s use RSMA type 
antenna connectors. On a Dual Radio AP-5131, a single dot on the 
antenna connector indicates the primary antenna for both Radio 1 (2.4 
GHz) and Radio 2 (5.2 GHz). Two dots designate the secondary 
antenna for both Radio 1 and Radio 2. On Single Radio models, a 
single dot on the antenna connector indicates the primary antenna for 
Radio 1, and two dots designate the secondary antenna for Radio 1

CAUTION

Do not supply power to the AP-5131 until the cabling of the unit is 
complete.

!

!

Содержание AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов