Motorola AP 5131 - Wireless Access Point Скачать руководство пользователя страница 164 | Manualshive

Страница: 164 / 698

Motorola AP 5131 - Wireless Access Point Скачать руководство пользователя страница 164

AP-51xx Access Point Product Reference Guide

5-16

Packet types supported for the type filtering function include 16-bit DIX Ethernet types as
well as Motorola proprietary types. Select an Ethernet type from the drop down menu, or
enter the Ethernet type’s hexadecimal value. See your System Administrator if unsure of the
implication of adding or omitting a type from the list for either LAN1 or LAN2.

4.

To optionally delete a type filtering selection from the list, highlight the packet type and click
the

Delete

button.

5.

Click

Apply

to save any changes to the LAN1 or LAN2 Ethernet Type Filter Configuration

screen. Navigating away from the screen without clicking Apply results in all changes to the
screens being lost.

6.

Click

Cancel

to securely exit the LAN1 or LAN2 Ethernet Type Filter Configuration screen

without saving your changes.

7.

Click

Logout

to securely exit the Access Point applet. A prompt displays confirming the

logout before the applet is closed.

5.2 Configuring WAN Settings

A

Wide Area Network (WAN)

is a widely dispersed telecommunications network. The access point

includes one WAN port. The access point WAN port has its own MAC address. In a corporate
environment, the WAN port might connect to a larger corporate network. For a small business, the
WAN port might connect to a DSL or cable modem to access the Internet.

Use the

WAN

screen to set the WAN IP configuration and

Point-to-Point Protocol over Ethernet

(PPPoE)

parameters.

To configure WAN settings for the access point:

1.

Select

Network Configuration

->

WAN

from the access point menu tree.

«
...
162
163
164
165
166
...
»

Содержание AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов