manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Руководство по продукции, Страница: 50 / 698

Поделиться
Скачать
Motorola AP 5131 - Wireless Access Point Скачать руководство пользователя страница 50

AP-51xx Access Point Product Reference Guide

2-6

To maximize the access point’s radio coverage area, Motorola recommends conducting a site survey 
to define and document radio interference obstacles before installing the access point.

2.4.1 Site Surveys

A site survey analyzes the installation environment and provides users with recommendations for 
equipment and placement. The optimum placement of 802.11a access points differs from 802.11b/g 
access points, because the locations and number of access points required are different to support 
the radio coverage area.

Motorola recommends conducting a new site survey and developing a new coverage area floor plan 
when switching from 2 or 11Mbps access points (AP-3021 or AP-4131 models) to 54Mbps access 
points (AP-5131 and AP-5181 models), as the device placement requirements are significantly 
different.

2.4.2 Antenna Options

2.4.2.1 AP-5131 Antenna Options

Both Radio 1 and Radio 2 require one antenna and can optimally use two antennae per radio (4 
antennae total for dual-radio models). Two antennae per radio provides diversity that can improve 
performance and signal reception. Motorola supports two antenna suites for the AP-5131. One 
antenna suite supporting the 2.4 GHz band and another antenna suite supporting the 5.2 GHz band. 
Select an antenna model best suited to the intended operational environment of your AP-5131.

Antenna connectors for Radio 1 are located in a different location from the Radio 2 antenna 
connectors. On single radio versions, the R-SMA connectors can support both bands and should be 
connected to a R-SMA dual-band antenna or an appropriate single band antenna. If necessary a 
R-SMA to R-BNC adapter (Part No. 25-72178-01) can be purchased separately. 

NOTE

On a single-radio AP-5131, Radio 1 can be configured to be either a 2.4 
GHz or 5.2 GHz radio. On a dual-radio model, Radio 1 refers to the AP-
5131’s 2.4 GHz radio and Radio 2 refers to the AP-5131 5.2 GHz radio. 
However, there could be some cases where a dual-radio AP-5131 is 
performing a Rogue AP detector function. In this scenario, the AP-5131 is 
receiving in either 2.4 GHz or 5.2 GHz over the Radio 1 or Radio 2 
antennae depending on which radio is selected for the scan.

Содержание AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов