Motorola AP 5131 - Wireless Access Point Скачать руководство пользователя страница 323 | Manualshive

Страница: 323 / 698

Motorola AP 5131 - Wireless Access Point Скачать руководство пользователя страница 323

Monitoring Statistics

7-25

number of packets requiring 1 retry, 2 retries etc. Use this information to assess whether an
abundance of retries warrants reconfiguring the access point radio to achieve better
performance.

2.

Click

Apply

to save any changes to the Radio Histogram screen. Navigating away from the

screen without clicking Apply results in changes to the screens being lost.

3.

Click

Undo Changes

(if necessary) to undo any changes made to the screen. Undo Changes

reverts the settings to the last saved configuration.

4.

Click

Logout

to securely exit the Access Point applet. A prompt displays confirming the

logout before the applet is closed.

7.5 Viewing MU Statistics Summary

Use the

MU Stats Summary

screen to display overview statistics for mobile units (MUs) associated

with the access point. The

MU List

field displays basic information such as IP Address and total

throughput for each associated MU. The

MU Stats screen is view-only with no user configurable data

fields. However, individual MUs can be selected from within the MU Stats Summary screen to either
ping to assess interoperability or display authentication statistics.

To view access point overview statistics for all of the MUs associated to the access point:

1.

Select

Status and Statistics

- >

MU Stats

from the access point menu tree.

«
...
321
322
323
324
325
...
»

Содержание AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов