Motorola AP 5131 - Wireless Access Point Скачать руководство пользователя страница 633

Страница: 633 / 698

Adaptive AP

10-5

The AP-51xx uses an encryption key to hash passphrases and security keys. To obtain the

encryption passphrase, configure an AP-51xx with the passphrase and export the configuration file.

10.1.5.2 Manual Adoption Configuration

A manual switch adoption of an AAP can be conducted using:

•

Static FQDN

- A switch fully qualified domain name can be specified to perform a DNS

lookup and switch discovery.

•

Static IP addresses

- Up to 12 switch IP addresses can be manually specified in an ordered

list the AP can choose from. When providing a list, the AAP tries to adopt based on the order
in which they are listed (from 1-12)

The WAN has no PoE support and has a default static AP address of 10.1.1.1/8.

NOTE

An AAP can use it's LAN or WAN Ethernet interface to adopt. The LAN is
PoE and DHCP enabled by default.

Содержание AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание AP 5131 - Wireless Access Point

Отзывы:

Motorola AP 5131 - Wireless Access Point, Руководство по продукции, Страница: 633 / 698

Результаты поиска

Содержание AP 5131 - Wireless Access Point

Отзывы: