manualshive.com logo in svg

Motorola AP 5131 - Wireless Access Point, Руководство по продукции, Страница: 305 / 698

Поделиться
Скачать
Motorola AP 5131 - Wireless Access Point Скачать руководство пользователя страница 305

Monitoring Statistics

7-7

3.

Refer to the

 

Received 

field to view data received over the access point LAN port.

Status

Displays whether this particular LAN has been enabled as viable 
subnet from within the LAN Configuration screen.

IP Address

The 

Internet Protocol (IP)

 addresses for the access point LAN port.

Network Mask

The first two sets of numbers specify the network domain, the next 
set specifies the subset of hosts within a larger network. These 
values help divide a network into subnetworks and simplify routing 
and data transmission.

Ethernet Address

The 

Media Access Control (MAC)

 address of the access point. The 

MAC address is hard coded at the factory and cannot be changed. 
For more information on how access point MAC addresses are 
assigned, see 

AP-51xx MAC Address Assignment on page 1-27

.

Link

The 

Link

 parameter displays 

Up 

if the LAN connection is active 

between the access point and network, and 

Down 

if the LAN 

connection is interrupted or lost. Use this information to assess the 
current connection status of LAN 1 or LAN2.

Speed

The LAN 1 or LAN 2 connection speed is displayed in Megabits per 
second (Mbps), for example, 54Mbps. If the throughput speed is 
not achieved, examine the number of transmit and receive errors, 
or consider increasing the supported data rate. To change the data 
rate of the 802.11a or 802.11b/g radio, see 

Configuring the 802.11a 

or 802.11b/g Radio on page 5-55

.

Duplex

Displays whether the current LAN connection is full or half duplex.

WLANs Mapped

The 

WLANs Mapped 

table lists the WLANs mapped to this LAN 

(either LAN1 or LAN2) as their LAN interface.

RX Packets

RX packets are data packets received over the access point LAN 
port. The number is a cumulative total since the LAN connection 
was last enabled or the access point was last restarted. To begin a 
new data collection, see 

Configuring System Settings on page 4-2

.

RX Bytes

RX bytes are bytes of information received over the LAN port. The 
value is a cumulative total since the LAN connection was last 
enabled or the access point was last restarted. To begin a new data 
collection, see 

Configuring System Settings on page 4-2

.

Содержание AP 5131 - Wireless Access Point



























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов