manualshive.com logo in svg

Morningstar TS-MPPT-60-600V-48-DB-TR, Инструкция по установке, эксплуатации и обслуживанию, Страница: 6 / 45

Поделиться
Скачать
Morningstar TS-MPPT-60-600V-48-DB-TR Скачать руководство пользователя страница 6

11

 

 TriStar MPPT-600V-TR Operator's Manual

10

 Getting Started

 

Getting Started

2.0

2.1 Overview

Thank you for selecting the TS-MPPT-600V-TR solar charge controller.  Both models are 

specialized components designed for use in grid-tie / off-grid systems. These products feature a 

transfer switch which allows the user to toggle connections between a grid-tie inverter and 

battery bank storage.  The diagram below shows the basic dual-mode functionality of the 

product.  

SOLAR 

ARRAY

Input (+) and 

(-) Wires

TS-600V-MPPT-TR 

     

 Battery        

Disconnect

 Main Input        

Disconnect

Battery  

Bank

Grid-tie

Inverter

Transfer

Switch

GFPD

PV and battery

 (+) and (-)

connections

PV and battery

(+) and (-)

connections

The TS-MPPT-600V-TR with TrakStar

TM

 MPPT Technology is an advanced maximum power point 

tracking solar battery charger. The controller features a smart tracking algorithm that finds and 

maintains operation at the solar array peak power point, maximizing energy harvest.

The TS-MPPT-600V-TR battery charging process has been optimized for long battery life and 

improved system performance. Self-diagnostics and electronic error protections prevent damage 

when installation mistakes or system faults occur. The controller also features eight (8) adjustable 

settings switches, several communication ports, and terminals for remote battery temperature 

and voltage measurement.

Please take the time to read this operator’s manual and become familiar with the controller. This 

will help you make full use of the many advantages the TS-MPPT-600V-TR can provide for your 

PV system. 

2.2 Regulatory Information

NOTE:  

This section contains important information for safety and 

regulatory requirements. 

The TS-MPPT-600V-TR controller should be installed by a qualified technician according to the 

electrical rules of the country in which the product will be installed.

TS-MPPT-600V-TR controllers comply with the following EMC standards:

•  Immunity:  EN61000-6-2:  2005

•  Emissions:  EN55022:2  2007 with A1 and A3 Class B1

•  Safety:  EN60335-1 and EN60335-2-29 (battery chargers)
A means shall be provided to ensure all pole disconnection from the power supply.  This discon-

nection shall be incorporated in the fixed wiring.
Using the TS-MPPT-600V-TR grounding terminal (in the wiring compartment), a permanent and 

reliable means for grounding shall be provided.  The clamping of the earthing shall be secured 

against accidental loosening.
The entry openings to the TS-MPPT-600V-TR wiring compartment shall be protected with conduit 

or with a bushing. 

FCC requirements:

This device complies with Part 15 of the FCC rules.  Operation is subject to the following two 

conditions:  (1) This device may not cause harmful interference, and (2) this device must accept 

any interference received, including interference that may cause undesired operation.   Changes 

or modifications not expressly approved by Morningstar for compliance could void the user’s    

authority to operate the equipment. 

Содержание TS-MPPT-60-600V-48-DB-TR














































Отзывы:

Нет отзывов