MORLEY-IAS ZX1e, Руководство пользователя, Страница: 7 / 28

ZX2E/ZX5E Fire Alarm Control Panels
MORLEY-IAS
User Manual Document No. 996-130, Revision: 01, Page 7 of 28
Key Legend Symbol Function
0 to 9 Press to enter numbers 0-9 or letters A-J (N-W with Shift)
> Press to scroll through fire alarms or faults manually on the display or
letter K (X with Shift)
< Press to scroll back through fire alarms or faults manually on the
display or letter L (Y with Shift)
Change
Z M
Press to change a display option (where allowed)
or letter M (Z with Shift)
Enter Press to confirm entry of a multiple digit number
No Press to answer No, or terminate a display option
Yes Press to answer Yes, or step through a display option
Shift Press to show user options on the display
Press, during programming, to allow entry of Letters N-Z
Table 2 - Alphanumeric and Interactive Control Keys
•
The control keys are disabled at USER LEVEL 1. Pressing the SHIFT key will cause the display to prompt
for entry of the Level 2 password. The password must be entered to re-enable the control keys at Level 2.
3.2 Front Panel LED Indications
•
The Level 1 LED Indicators are divided into two
sections.
•
The upper array of LED Indicators shows the
operational conditional of the panel and the
installation.
•
The lower array of Zone LED indicators shows
the location of a fire alarm or fault.
•
The standard Zone LED Indicators provide
identification for up to 20 zones. On the ZX5E
panel, this can be extended by adding either a
further 20 zones (to give a total of 40 zones) or a
further 60 zones (to give a total of 80 zones).
•
The LED Indicators illuminate as red, yellow or
green to give a clear indication of the panel
status as follows:
FIRE
FAULT
System / CPU Fault
Acknowledged
Earth Fault
Disablement
Test
Sounder Fault
Delayed Mode
Relays Disabled
Power
Supply Fault
Alarms Silenced
Sounders Disabled
Figure 3 - System Control LED Display