ZX2E/ZX5E Fire Alarm Control Panels
MORLEY-IAS
User Manual
Document No. 996-130, Revision: 01,
Page 5 of 28
EN54
!
EN54-2 13.7
Maximum of 512
sensors / manual
call points per
panel.
•
The ZX1E, ZX2E & ZX5E range of panels has many features, which if used
inappropriately, may contravene the requirements of EN54. Where such a
possibility may arise, a suitable warning is given with brief details of the
EN54 requirement and the relevant section it pertains to. A typical EN54
non-compliance warning is illustrated.
2 User Control Levels
2.1 Level
Definition
•
The ZX1E, ZX2E and ZX5E Fire Alarm Control Panels have three user control levels.
•
At all three levels, the LED Displays indicate the condition of the installation, the Zone LED Displays
indicate the location of any fire alarm or fault and the alphanumeric display gives more detailed fire alarm
or fault information.
•
At USER LEVEL 1, all the displays are functional but the front panel control keys are inhibited.
•
At USER LEVEL 2, all front panel controls are functional and some system operation parameters and
functions can be changed. User Level 2 is reached by entering a password from level 1.
•
At USER LEVEL 3, all front panel controls are functional and full system configuration and programming is
possible. User Level 3 is reached by entering a password from either Level 1 or Level 2. User Level 3 is
intended for use by the system installer / maintenance contractor.
2.2 User
Passwords
•
Up to ten USER LEVEL 2 passwords can be programmed into the panel.
•
The USER LEVEL 2 passwords can be assigned / changed at Level 3 by the installer / maintenance
contractor. Level 2 passwords do not allow access to Level 3 functions.