ZX2E/ZX5E Fire Alarm Control Panels
MORLEY-IAS
User Manual
Document No. 996-130, Revision: 01,
Page 23 of 28
5.4.5 View
•
To select the view menu, press
‘7’
from the user main, option menu. The display then shows:
VIEW : 1)Devices 2)Log 5)Faults
4)Outputs 5)Disablements 6)Sys Events
•
This menu allows the user to view information about the selected option on the alphanumeric display.
•
After viewing an option, press
NO
to return to the view menu. From the view menu, press
NO
to return to
the main options menu.
•
The following View Mode Options are available:
View Option
Description of Function
1. Devices
Displays the status and text of anyone detector on a signaling loop. The panel prompts for the
loop number and device address.
2. Log
Displays the contents of the event log. Events can be scrolled forwards or backwards using the
> or < keys.
3. Faults
Displays the current panel fault status. The display is identical to the automatic fault / fire alarm
display, but with the ability to manually scroll through all the faults using the > and < keys.
4. Outputs
Displays the required state of all output (sounder and relay) devices. Pressing the SILENCE /
RESOUND key turns all sounders to an off condition.
5. Disablements
Displays a sub menu from which the following can be selected
1) Zones – Allows all zones that are in either a full or a partial state of disablement, to be viewed.
2) Inputs – Allows all inputs that are disabled, to be viewed.
3) Outputs – Allows all outputs that are disabled, to be viewed.
NOTE) Pressing any button scrolls through the individual disablement conditions. Press
‘NO’
to
return to the view menu.
6. Sys
Events
The top line of the display shows the event number (1 – 999). The bottom line, immediately
beneath the event number, shows whether the event is present (+) for non-latched events, (*) for
latched events or (-) for inactive events.
Table 5 - View Mode Options