Morgana AutoCreaser Pro 50, Руководство по обслуживанию

Страница: 2 / 40

Page 2
CREASING
INTRODUCTION
MORGANA AutoCreaser Pro 50
i ........... Introduction
ii .......... Fasteners
The purpose of this manual is to explain the procedure for dis -
mantling and re-assembly of the major assemblies on the Morgana
Auto Creasing machine.
All the engineering adjustments are shown at the end of each
relevant section.
Operator's adjustments and routine maintenance are explained in
the appropriate operators guide which should always be used in
conjunction with this manual.
It is always a good idea to have a copy of the machines illustrated
parts manual available when servicing, as its illustrations provide
an invaluable reference to the construction of the individual
assemblies used to build the machine.
All threaded fasteners are isometric & all nuts are isometric
hexagon. All screws are hardened high tensile steel.
Cap head, Button head, Socket countersunk, Shoulder bolts and
Grubscrews have internal hexagon drives which require isometric
hexagon wrenches (allen keys). Ball drivers may be used, but care
should be taken - particularly when releasing screws for
dismantling - to avoid breaking the driver as they cannot cope with
full tightening torques.
NOTE ..... Do not substitute fasteners with low grade alternatives
which may fail or become irremovable.