www.miinet.com
Moore Industries-International, Inc.
- 50 -
User’s Manual
225-748-01L
February 2017
Using PC Configuration Software Offline
When using the STA PC Configuration without a unit connected or properly communicating with
software (offline) it is important to know that the following items will be greyed out and disabled
from making changes.
Input Tab:
Input Trimming: Set and Trim buttons are disabled.
Analog Output Tab:
Trimming: The Zero, Full, Trim, Unfix and the Reset to factory “Reset” buttons are disabled.
Output Test: Fix and Unfix buttons are disabled
The left panel section (Sync Status, Program Status, etc.) can be disregarded, these sections
are only updated if a unit is connected. The “Reset Input Fault” is also disabled..
Note:
The configuration software will enter offline mode if there is no unit connected upon
startup, it will also enter offline mode if there is a failed upload or download.
Note:
While in offline mode the user can save Input Trimming mode and set points to a file. To
use these settings simply open file while unit is connection and download saved configuration file
to unit.
Note:
Unless otherwise noted, ensure that the PC Program is idle before making any selections
or configuration changes to the parameters and windows of the program. Also, when attempting
to download, or upload, monitoring must be stopped. To do this, click “Stop” in the Monitoring
dropdown menu, or click the “Stop Monitoring” icon.
Programmable Current/Voltage Safety Trip Alarm
STA
HLPRG
SEC
TION 5
