Moog G396-026, Руководство по эксплуатации

Страница: 46 / 85

Programmable Multi-Axis Servo Drive Power Supply Unit Operation Manual
ID no.: CA97556-001 Date: 03/2015
moog
46
Electrical installation
Value Value name Description
12 OUTPUT_FS_I_LIM_ACTIV No function
13 OUTPUT_FS_ENMO No function
14 OUTPUT_FS_PLC No function
15 OUTPUT_FS_WARN General warning
16 OUTPUT_FS_WUV Warning: undervoltage in DC link (defined in P-0730 [0,1])
17 OUTPUT_FS_WOV Warning: overvoltage in DC link (defined in P-0730 [2,3])
18 OUTPUT_FS_WIIT
Warning: I2t-power stage protection threshold reached
(defined in P-0730 [6,7])
19 OUTPUT_FS_WOT_PTC
Warning: KTY sensor of step-up choke (defined in
P-0730 [12,13])
20 OUTPUT_FS_WOTI
Warning: heat sink temperature of Power Supply Unit
(defined in P-0730 [08,9])
21 OUTPUT_FS_WOTD
Warning: internal temperature in Power Supply Unit (defined
in P-0730 [10,11])
22 OUTPUT_FS_WLIS
Warning: apparent current limit value exceeded (defined in
P-0730 [4,5])
23 OUTPUT_FS_WLVOLT
Warning: DC link voltage limit value exceeded (defined in
P-0730 [14,15])
24 OUTPUT_FS_COM_1MS Setting outputs via COM Option in 1 ms cycle
25 OUTPUT_FS_COM_NC Setting outputs via COM Option in NC cycle
26 OUTPUT_FS_SH_S No function
27 OUTPUT_FS_BC_FAIL Brake chopper fail error (Error = LOW)
28 OUTPUT_FS_WLPOW Effective power limit exceeded (defined in P-0730 [16,17])
29 OUTPUT_FS_GRID_OK
Mains OK (frequency AND voltage within tolerance window
= high)
Table 3.8 Selectable functions of digital outputs OSD00 to OSD02
3.9 Functions of the digital inputs
The following functions can be selected for digital inputs ISD00 to ISD06:
Value Value name Description
0 MPRO_INPUT_FS_OFF No function
1 MPRO_INPUT_FS_START Start loop control
2 MPRO_INPUT_FS_E_EXT External error on another device
3 MPRO_INPUT_FS_WARN External warning on another device
4 MPRO_INPUT_FS_RSERR Reset an error message
Table 3.7 Selectable functions of digital inputs ISD00 to OSD06
3.10 Functions of the digital outputs
The following functions can be selected for digital outputs OSD00 to OSD02:
Value Value name Description
0 OUTPUT_FS_OFF No function
1 OUTPUT_FS_ERR General error
2 OUTPUT_FS_ACTIV Control in function
3 OUTPUT_FS_S_RDY Device initialised
4 OUTPUT_FS_PRECHARGE_RDY Device precharged
5 OUTPUT_FS_C_RDY Device ready (DC link voltage present)
6 OUTPUT_FS_REF DC link voltage reference (setpoint) reached
7 OUTPUT_FS_E_FLW No function
8 OUTPUT_FS_LIMIT
DC link voltage reference limitation active (the voltage is
outside the defined range.)
9 OUTPUT_FS_UDC_GT_UDCX
Actual DC link voltage higher than defined in parameter
P-0740 Voltage threshold
10 OUTPUT_FS_P_LIM_ACTIV No function
11 OUTPUT_FS_UDC_LIM_ACTIV
DC link voltage reference limitation active (the voltage is
outside the defined range.)