Moog G396-026, Руководство по эксплуатации

Страница: 42 / 85

Programmable Multi-Axis Servo Drive Power Supply Unit Operation Manual
ID no.: CA97556-001 Date: 03/2015
moog
42
Electrical installation
+ +
–
+
– – –
+
–
+
X11 X11
+ –
X11 X11 X11 X11
Multi-Axis Servo Drice size
5
Multi-Axis Servo Drice size 4 Multi-Axis Servo Drice size
3
Multi-Axis Servo Drice size
2
Multi-Axis Servo Drice size
1
Power Supply Unit
size 6A
Figure 3.18 Schematic: Size 6A DC power supply connection to smaller Multi-Axis Servo Drives
3.7.2 DC power supply connection (X11) size 6A
Size 6A connection to smaller Multi-Axis Servo Drives
Connect terminal X11/+ of the Power Supply Unit to terminal X11/+ of the next butt-mounted
Multi-Axis Servo Drive.
Use the ready made-up DC power supply cables.
Take off the shrink tubing on the round end.
Use the longer conductor for servo drives butt-mounted on the right.
Use the shorter conductor for servo drives butt-mounted on the left.
On the Multi-Axis Servo Drive connect the DC power supply conductor to the next butt-mounted
Multi-Axis Servo Drive.
Connect terminal X11/- of the Power Supply Unit to terminal X11/- of the next butt-mounted
Multi-Axis Servo Drive.
Use the ready made-up DC power supply cables.
Take off the shrink tubing on the round end.
Use the shorter conductor for servo drives butt-mounted on the right.
Use the longer conductor for servo drives butt-mounted on the left.
On the Multi-Axis Servo Drive connect the DC power supply conductor to the next butt-mounted
Multi-Axis Servo Drive.
Connect the touch protection to DC link terminals X11.
For more information refer to the Multi-Axis Servo Drive Operation Manual.
1.
2.
3.