MONTAGUE M-E1, Руководство пользователя

Страница: 60 / 69

60
Suspension Forks
Each month, lubricate your suspension
fork. Refer to the supplementary manual
provided by the fork maker, or consult
your dealer.
Each year, replace the oil in your
suspension fork. To replace the oil,
special tools and training are necessary,
so only your dealer should do this.
Cables
Apply lubricant to a cable when you
install it.
To install a cable in a cantilever brake,
special tools and training are necessary,
so only your dealer should do this.
To install a cable
1. Before you remove the used cable,
note its path on the frame. Loosen
the cable-clamp bolt, and remove
the worn cable.
2. Apply grease to the new cable
where it passes through housing or
guides. Install the new cable on the
same path as the used cable.
3. Make sure the leaded end of the
cable is installed correctly in the
lever. Make sure the housing is
correctly installed in the housing
stop of the lever. • If necessary
when you install a cable in a brake,
adjust the brake again.
PROPER MAINTENANCE AND ADJUSTMENT
CONTINUED
4. Turn the barrel-adjuster clockwise
so that the threads on the barrel-
adjuster do not show. • For a
derailleur cable, put the shift-lever
in the position with the least cable
tension. • For a brake cable, hold
the brake closed while you do the
subsequent step.
5. Tighten the cable-clamp bolt to 52-
69 lb•in (6-8 Nm).
6. Cut the cable so that no more than
2” (51 mm) extends through the
clamp-bolt.
7. Put a metal cap or put a bit of
solder on the end of the cable to
prevent a frayed cable.