MONTAGUE M-E1, Руководство пользователя

Страница: 46 / 69

46
•
Continually test the functionality of
the e-bike and check for wear, and
refer to all notes on the rechargeable
battery in this user manual and the
drive system manual.
•
Keep the e-bike and components
clean.
•
Store the battery at room tempera-
ture prior to riding.
•
Follow the instructions regarding the
temperature range for storage of the
battery.
•
Do not insert the battery into the cas-
ing until just before you ride.
Cleaning, Storing, and
Transporting your E-bike
When not riding, turn the drive system
off and remove the battery to prevent
unauthorized use. Remove the battery
and key when the bike is parked for long
periods of time.
Cleaning
Use a damp sponge with only a mild
soap and water solution. Rinse the
sponge often. Do not spray water directly
on controls or drive system components.
•
Use a soft brush to remove dry con-
tamination.
•
If any part of any component of
the drivetrain is wet, allow it to dry
completely before connecting the
charger.
•
Do not use a pressure washer or dry
with compressed air. This will force
contaminants into sealed areas,
electrical connections/components
promoting corrosion, immediately
damaging, or result in accelerated
wear.
•
Do not use alcohol, solvents or abra-
sive cleaners to clean the battery or
charger.
•
For instructions on how to clean
drivetrain components, please refer
to the supplementary drive-assist
manual for the drivetrain manu-
facturer’s instructions. Make sure
connectors are dry and clean before
reconnecting and riding.
DRIVE-ASSIST SYSTEM
CONTINUED
Remove the battery from the e-bike
before cleaning. Make sure no electri-
cal component is connected or on as
you may be injured.
WARNING
Keep water away from the electrical
components.
WARNING
Make sure the bike is secured upright
and can not fall over accidentally while
you are cleaning it. Don’t rely on
the kickstand. Use a sturdy portable
bicycle wheel stand to hold the bike
upright.
WARNING