MONTAGUE M-E1, Руководство пользователя

Страница: 31 / 69

31
ASSEMBLING YOUR MONTAGUE BICYCLE
CONTINUED
4. Remove the two mounting bolts
on the fork lowers by turning them
counter-clockwise to loosen (Fig 22,
page 32).
5. Pass the bolts through the eyelets on
the ends of the mounting arms, and
re-attach them to the fork. Turn them
counterclockwise to tighten (Fig 22,
page 32).
Installing the Front Fender
The front fender mounts to three points
on the fork. The mounting bolts will
already be in place on the fork arch and
fork lowers. To install the fender:
1. Remove the nut from the mounting
bolt on the fork arch by turning it
counter clockwise (Fig 19). An L
shaped bracket is being held in place
by the nut. Slide the L bracket off the
bolt and place the nut and bracket
aside.
2. Move the fender into place, with one
mounting arm on each side of the
wheel (Fig. 20). The slotted hole on
the top of the fender should slide
over the mounting bolt on the fork
arch.
3. Replace the L shaped bracket and
nut by sliding the bracket over the
mounting bolt, and threading the
nut onto the bolt. The slotted hole
of the fender should be sandwiched
between the L shaped bracket and
the fork arch (Fig 21).
Fig. 19: Fender mounting bolt nut on fork arch Fig. 21: Fender in place with nut and L bracket
re-attached.
Fig. 20: Front fender in place