background image

62

MONTAGUE CORPORATION LIMITED WARRANTY

Montague Corporation warrants each 

new Montague electric bicycle frame 

against defects in workmanship and 

materials for 5 years from the date 

of purchase for the original owner. 

Montague Corporation also warrants 

all original parts, excluding suspension 

forks and drive-assist parts, for a period 

of one year from the date of purchase. 

Forks and drive-assist system parts shall 

be covered by the stated warranty of 

their original manufacturers. Paint and 

decals are warranted for one year. This 

warranty is expressly limited to the repair 

or replacement of a defective frame, fork, 

or defective part and is the sole remedy 

of the warranty. This warranty is not 

transferable from the original owner.  

Montague Corporation does not make 

any promise, representation or warranty 

regarding the use of this e-bike. 

Failure to follow the instructions and 

warnings in this manual may invalidate 

the warranty. Improper maintenance, use 

of the e-bike, the battery or charger will 

invalidate the warranty(ies) provided 

The applicable statutory warranty 

provisions will be those for the country in 

which the product was purchased.

Any modification or attempted 

modification of the drive train system, 

power-output is prohibited and will void 

the warranty.

Claims must be made through an 

authorized Montague dealer. Proof 

of purchase is required. In addition, 

a warranty registration card or online 

registration must be completed and 

received by Montague Corporation 

before a warranty claim may be 

processed.

This warranty does not cover normal 

wear and tear, improper assembly, 

damage or failure due to accident, 

misuse, abuse or neglect, follow-

up maintenance, labor charges for 

parts replacement or changeover, or 

installation of parts or accessories not 

originally intended or compatible with 

the bicycle as it was sold. Modification of 

the frame or components shall void this 

warranty.

Montague Corporation shall not 

be responsible for incidental or 

consequential damages. Some states 

do not allow the exclusion of incidental 

or consequential damages, so the above 

exclusion may not apply to you.  

Labor charges for parts changeovers 

are not covered by the warranty.

This warranty gives the consumer 

specific legal rights, and those rights may 

vary from place to place. This warranty 

does not affect the statutory rights of the 

consumer.

This warranty is expressly limited to the 

repair or replacement of a defective item 

and is the sole remedy of the warranty. 

This warranty extends from the date of 

purchase, applies only to the original 

owner, and is not transferable.

Содержание M-E1






































































Отзывы: