MONTAGUE M-E1 Скачать руководство пользователя страница 5

Страница: 5 / 69

The frequently updated website also

gives you a link to new instructions. If

you make a decision not to complete

the registration, make sure you visit the

website frequently.

Since the components on your

Montague are industry standard, repairs

or replacements may be performed at

virtually any retail bicycle dealer.

If you have any questions about your

Montague after reading this manual, or

encounter any problems when folding

or unfolding your bike, please visit the

support section of our website at

www.montaguebikes.com/support or call

Montague’s Customer Support Team

at +1 617-491-7200. A knowledgeable

representative will be happy to answer

any questions and help you to fully enjoy

your new Montague.

Owner’s Responsibility

Before riding your Montague, carefully

follow all assembly instructions.

Ensure your bike is the correct size for

your comfort and safety. When standing

over the frame (straddle frame) you

should have a minimum of 1.0” clearance

between the top tube and your body. See

page 12 for more information.

Note: Montague does not make

bicycles intended for children. Please

make sure all riders are adults.

Bicycle riding can be a hazardous

activity even under the best of

circumstances. Proper maintenance of

your bicycle is your responsibility as it

helps reduce the risk of injury.

All quick releases must be securely

fastened before riding any Montague

bicycle. The quick releases are pictured

on page 11 in Fig. 2. They are: the front

wheel quick release (#25), the seat

post quick release (#8), the frame quick

release (#9), the rear wheel quick release

(#32), and the stem quick release (#4).

For instructions on operating the quick

release levers, read Assembling Your

Montague Bicycle and Folding Your

Montague Bicycle on pages 26-37.

Double check to ensure all bolts and

screws are tightened to the correct

torque specifications.

Make sure anyone to whom you loan

your Montague understands how to work

the quick release levers and how to fold

and unfold your Montague bike properly.

The owner is responsible for required

normal maintenance services, such

as those listed in the “Maintenance

Schedule” section of this booklet (page

61) in order to keep the bicycle in good

operating condition.

INTRODUCTION

CONTINUED

Make sure to read this complete manual

before riding your bike. Failure to do

so, or failure to follow its guidelines

could lead to serious injury or death.

WARNING

Содержание M-E1






































































Результаты поиска

Содержание M-E1

Отзывы:

Похожие инструкции для M-E1

Бренды по названию

Популярные бренды

MONTAGUE M-E1, Руководство пользователя

Результаты поиска

Содержание M-E1

Отзывы:

Похожие инструкции для M-E1

Бренды по названию

Популярные бренды