background image

13

BEFORE YOUR FIRST RIDE 

CONTINUED

bicycles. Read the supplementary 

manuals to understand the power-

assisted drive system and other 

components.

Before your first ride, you should 

use the lowest power ECO mode and 

become familiar with the operation of 

the electric bicycle by practicing starting 

and stopping, cornering and navigating 

obstacles in a safe environment away 

from other bicycles, pedestrians, and/

or vehicles. Learn about the e-bike’s 

controls and digital data/messaging.

Check your Brakes, Steering, 

and Quick Releases

Press each hand lever to ensure the 

brakes are moving freely and stop the 

bike. Braking performance changes with 

riding conditions. Practice braking at low 

speeds before taking your e-bike out into 

high traffic areas or trails. If your brakes 

are not working properly, DO NOT ride 

your e-bike. Take the e-bike to your local 

dealer for service.

Check that all quick releases (front 

wheel, frame, stem, seatpost, and rear 

wheel) are fastened. Nothing should 

rattle or be loose.

Review Riding Safely on page 20 and 

Riding Instructions on page 23 before 

attempting to ride your Montague e-bike. 

Check the steering as shown in Fig. 5, 

page 18.

Prevent Toe Overlap

Some frame sizes, especially smaller 

sizes, use a short-wheelbase design 

with the front wheel close to the pedals. 

Increasing the 

distance between 

the front wheel and 

the pedals could 

place the handlebar 

too far away or 

make the steering 

unwieldy. On 

bicycles where this 

distance is short, 

when the handlebar 

is turned during very slow speeds your 

foot or toe-clip could overlap or touch the 

front wheel or fender (Fig. 3).

This overlap is affected by the size of 

your feet, the length of the crankarms, 

and the pedals you choose. At usual 

speeds, the handlebar does not turn 

suffiently for overlap to occur. When 

you ride slowly, do not pedal when the 

handelbar is turned. 

Fig. 3. Toe overlap.

If your foot or toe-clip touches the front 

wheel or fender, this could decrease 

your control and cause a fall. Do not 

pedal when you turn at slow speed.

    WARNING

Failure to practice riding your e-bike 

in a safe environment prior to riding 

on a public road or pathway with other 

users of the road may result in serious 

injury or death to you or other users of 

the road.

    WARNING

Содержание M-E1






































































Отзывы: