background image

51

7.  Open the stem quick release and 

begin to fold the handlebars down to 

provide access to the expander bolt.

8.  Tighten the expander bolt to 120 

lb•in (13.6 N•m).

9.  Fold the handlebars back to the 

upright position, and close the stem 

quick release.

Seat (Saddle) Adjustments

PROPER MAINTENANCE AND ADJUSTMENT 

CONTINUED

If you complete these adjustments 

and the quick release is tight, yet the 

handlebars feel loose, do not ride 

your bike. Take it to your local dealer 

for inspection and adjustment.

    WARNING

Saddle angles can be adjusted to meet 

your preferences. It is recommended 

that you first try to ride with the top of the 

saddle parallel to the ground. The saddle 

can also be moved forward or rearwards 

along the seatpost to adjust the distance 

from the handlebar.

To adjust the angle of the saddle:

1.  Decrease the tightness of the 

saddle-clamp bolt (Fig. 50) until the 

saddle can be moved.

2.  Put a straight edge, bubble level or 

ruler across the top of the saddle to 

better see the angle of the saddle.

3.  Adjust the saddle and tighten the 

saddle-clamp bolt for your type of 

seatpost: 

 

• One bolt that uses a 13 or 14 mm 

open-end wrench: 180-220 lb•in 

(20.3-24.9 N•m) 

• One bolt across the seatpost head 

that uses a 5mm allen wrench: 120-

130 lb•in (13.6-14.7 N•m) 

• One bolt that uses a 6mm allen 

wrench: 150-250 lb•in (17-28.3 N•m) 

• Two bolts that use a 5mm allen 

wrench: 80-120 lb•in (9.6-14.1 N•m)

closed

Saddle-clamp 

bolt

Seat post 

quick release

Fig. 50: Saddle bolts and adjustments.

If you ride a saddle that is not adjusted 

correctly or one that does not correctly 

support your pelvic area, it can cause 

injury to your nerves and blood 

vessels. If your saddle causes pain or 

numbness, adjust the saddle position 

or speak to your dealer about a saddle 

that is more comfortable.

    WARNING

An incorrectly positioned seatpost can 

break the saddle rails or the seat-

clamp bolt, and cause you to fall. Only 

clamp the flat portion of the saddle 

rails in the seat clamp.

    WARNING

Содержание M-E1






































































Отзывы: