MONTAGUE M-E1, Руководство пользователя

Страница: 40 / 69

40
Note: When closing, if the quick release
lever does not leave an imprint on the
palm of your hand, refer to Adjusting the
Frame Quick Release below (Fig. 45).
9. Raise the seatpost to the desired
position (Fig. 24 and 25, pages 32 -
33).
Adjusting the Frame Quick
Release
If the frame quick release becomes
loose or does not leave an imprint on
your palm when closing the lever, the
quick release may need to be adjusted.
3. Once the lever is securely closed,
you should no longer be able to pivot
the stem along the hinge, and you
should not be able to move the stem
relative to the front wheel.
4. Ensure the frame quick release is in
the open position (Fig. 30 page 35).
5. Unlock the two halves of the frame
by detaching the fork latch from the
post on the rear rack (Fig. 34, page
36).
6. Unfold the frame, pivoting the front
half of the frame until it is aligned
straight with the rear half (Fig. 43).
7. Make sure the Wedge is completely
engaged. It should hold the Upper
and Lower Clamps together, and the
frame should no longer fold (Fig. 40).
8. Secure the frame quick release
lever by closing the quick release. It
should point straight down and lay
flat against the frame when closed.
(Fig. 44)
UNFOLDING YOUR MONTAGUE BICYCLE
CONTINUED
Fig. 44: Close the frame quick release
Fig. 43: Unfold the frame
Fig. 45: Tighten frame quick release adjusting nut