BEFORE YOU START
1. 4in1 is for riders 1 to 7 years old.
2. Do not exceed 120 lbs (54 kilograms) total weight on the scooter.
3. Always wear proper protective equipment, such as a helmet, elbow, wrist, hand, and knee pads. Always keep the chinstrap
securely buckled on the helmet. Long sleeve shirt, long pants, shoes, and elbow and knee pads are strongly encouraged.
4. Use the scooter only on flat, dry, level ground without loose debris like rocks or gravel. Keep shoelaces out of the way
of wheels or pivots.
5. Never use the scooter at dusk or night, or in wet or icy conditions. Wet weather impairs traction, braking, and visibility.
6. Avoid sharp bumps, drainage gates, and sudden surface changes. Avoid water, speed bumps, sand, gravel, and
anything else that could cause the wheels to suddenly stop. When in doubt, avoid bumps.
7. Do not wear anything that obstructs visibility or function when riding the scooter.
8. Watch out for pedestrians. Avoid excessive speed.
9. Never ride in traffic or on the street, and watch your surroundings for pedestrians, bikes, and skateboard and scooter
riders. Use the scooter in areas free from fixed or moving hazards such as poles, curbs, hydrants, walls, parked
automobiles, and traffic.
10. Keep hands and feet clear of steering mechanisms at all times.
11. Always check and secure all fasteners before every ride. Make sure the SPRING BUTTONS and RISER TUBE CLAMPS
are properly positioned and fully tight.
12. Do not attempt to jump over large objects.
13. Always avoid excess speed associated with downhill rides. Avoid steep inclines and do not ride too fast – you can lose
control and fall.
14. Always replace worn or broken parts immediately. Email us at [email protected].
AN IMPORTANT MESSAGE TO PARENTS
This manual contains important safety information. For your child’s safety, it is your responsibility to review this information
with your child and make sure that your child understands all warnings, cautions, instructions, and safety topics. Nextsport
recommends that you periodically review and reinforce the information in this manual with younger riders, and that you
inspect and maintain your child’s scooter to ensure their safety. Read the instructions carefully and assemble the scooter
according to these instructions before you allow the child to ride. This scooter requires assembly by an adult.
A CAUTION ABOUT SCOOTER RIDING
You will see people on various videos and maybe even people you know doing tricks, stunts, and jumps. These are people
who have been practicing on scooters for an extended period of time. Build your skills gradually in order to minimize risk
and injury. Skateboard parts are not designed for scooters.
1
FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS FURTHER
INCREASES RISK OF SERIOUS INJURY. USE AT YOUR OWN RISK AND WITH
APPROPRIATE AND SERIOUS ATTENTION TO SAFE OPERATION. USE CAUTION.
CONTENTS
Before You Start
page
1
ComponentS & partS page
2
aSSemBling Your 4in1 page
3
Seat
aSSemBlY
page 3
HanDle Bar aSSemBlY
page 3
unloCK piVot Hanger
page 3
aDJuSting riSer HeigHt
page 3
BraKe uSe
page
4
How to riDe
page
4
maintenanCe & Before You riDe
page 5
CompanY & warrantY information
page 6
Read and understand this entire manual before using this product.
DO NOT RETURN PRODUCT TO STORE!
we want to help you directly!
For assistance, contact [email protected]
www.fuzionscooter.com
ASSEMBLING YOUR 4in1
SEAT ASSEMBLY:
SHORT RISER
STEERING TUBE:
TALL RISER
STEERING TUBE:
HANDLE BAR ASSEMBLY:
UNLOCK PIVOT HANGER:
COMPONENTS & PARTS
4in1 COMPONENTS LIST:
Front Hanger Assembly
Deck
Foot Brake
Seat
Seat Bolt
Tall Riser
Tall Riser Lower Clamp
Tall Riser Upper Clamp
Tall Riser Handle Bar Clamp
Short Riser
Short Riser Lower Clamp
Short Riser Handle Bar Clamp
Handle Bar
Pivot Locking Bolt
(Front Pivot x 1, Rear Pivot x 1)
Allen Wrench x 2
1
11
11
1
2
12
12
2
3
13
13
3
4
4
14
14
5
5
6
6
15
15
7
7
8
8
9
9
10
10
2
1
1
1
2
2
2
3
3
Visit our website
www.fuzionscooter.com
for product support,
replacement parts
and general help.
Insert front hanger assembly
into steering tube.
After handle bar is inserted,
make sure spring button pops
out of hole in steering tube.
Use allen wrench to unlock
the front pivot to allow
carving turns.
Slide the seat on to steering
tube to the desired height.
Tighten clamp securely.
Remove rear pivot hanger
lock with allen wrench to
allow carving turns.
Secure seat with seat bolt.
Install handle bar for either tall
or short riser.
ADJUST TALL
RISER HEIGHT:
Loosen clamp to adjust
steering tube height.
NOTE:
Do NOT ride with
one bolt locked.
WARNING: Both front and rear pivot locks need to be securely
locked while seat is in use. Other stages are optional.
owner’s manual
owner’s manual
owner’s manual
owner’s manual
