Moneris smartselect, Руководство по эксплуатации

Страница: 36 / 198

Configuring Your Terminal
26 SmartSELECT Merchant Operating Manual v 2.0
4.2.2: Restarting the Shortcut
While the Shortcut is in progress, you can restart the Shortcut at any time:
1. Press
Restart
in the top right corner of the screen. The prompt
Restart Short-
cut?
will appear.
2. Select
Yes
to reboot the terminal and return to the beginning of the shortcut
OR
Select
No
to return to the screen on which you pressed
Restart
.
4.2.3: Exiting the Shortcut
You can exit the Shortcut at any time:
1. Press
Exit
until the
Abandon Shortcut?
prompt appears.
IMPORTANT:
If you abandon the Shortcut, you will not be able
to return to it. In order to complete the terminal
setup you will have to access the
Terminal
Configuration
menu and select each parameter
individually to key in the settings.
2. Select
Yes
to exit the Shortcut permanently and return to the Idle screen. The
prompt
Please Complete Terminal Set Up
will appear on the Idle screen.
Completing the Shortcut After Exiting
In order to complete the terminal setup, you will need to:
1. Press
Menu
.
2. Press
Config
. The
Terminal Configuration
menu appears.
3. Select
General Parameters
.
4. Select each parameter individually and key in the settings.
5. Press
Exit
on the
General Parameters
menu.
6. If you wish to configure Cheque Authorization, Purchasing Cards, Third
Party Hosts, Third Party Cards, loyalty programs or reward programs:
select the list item from the
Terminal Configuration
menu and key in the set-
tings.
7. Press
Admin
. The
Administrative Transactions
menu appears.
8. Select
Host Initialization
. The
Enter Merchant ID
prompt appears.
9. Key in your Merchant ID and press
Enter
. The
Enter Initialization Phone
Number
prompt appears.
10. Key in the Moneris Host phone number (see section 1.2: Merchant and Termi-
nal Information ) and press
Enter
. The terminal communicates with the Mon-
eris Host then the
Ready Please Logon
prompt appears.
11. Press
Menu
. The
Administrative Transactions
menu appears.
12. Select
Logon
.
• If your terminal is configured to process Debit transactions, the
Logon Swipe Admin Card
prompt appears.