Moneris smartselect, Руководство по эксплуатации

Страница: 35 / 198

SmartSELECT Merchant Operating Manual v 2.0 25
Configuring Your Terminal
• If not, select
Minimum
. The
General Parameters
menu appears.
- Select each parameter individually and key in the settings. When the
parameters are configured, press
Exit
on the
General Parameters
menu.
OR
- If you wish to use the default settings for all parameters, simply
press
Exit
on the
General Parameters
menu.
Go to step 7.
6. If you selected
Recommended
at the
Select Configuration Type?
prompt, the
following prompts appear (the default settings are bolded):
a.
Balanced Prompt?
on Close Batch Report: Yes or No
b.
Number of Receipt Copies?:
1, 2 or 3
c.
Audible Key Click?
: Yes or No
d.
Trailer Message?
: Yes or No . If Yes:
- Enter English Trailer Message
-
Enter French Trailer Message
e.
Purchasing Card On?
: Yes or No . If Yes:
- Sales Tax Type?
: GST-only, GST & PST, GST & QST, HST
- Merchant GST Number
- Merchant PST (or QST) Number
if required
f.
Enter Merchant ID
(see Section 1.2: Merchant and Terminal Information
)
g.
Enter Initialization Phone Number
(see Section 1.2: Merchant and Terminal
Information
)
7. When the parameters have been set up, the terminal displays
Host Initialization
while it performs an Initialization transaction.
• If your terminal is configured to process Debit transactions, the
Logon Swipe Admin Card
prompt appears.
• If your terminal is configured to process only Credit transactions, go
to step 9.
8. Swipe your POS Admin Card.
9. The terminal displays the status prompt
Logon
while it communicates with the
Moneris Host and logs the terminal on to the Host.
10. The Introduction Shortcut appears. Read the shortcut then press
Exit
. The
Are
you participating in an ERNEX Electronic Marketing program?
prompt
appears.
11. If you are registered with ERNEX to provide ERNEX Gift Cards, select
Yes
.
a. The
Enter ERNEX Terminal ID
prompt appears. Key in the ERNEX Termi-
nal ID provided to you by ERNEX and press
Enter
.
b. The terminal communicates with the ERNEX Host in order to initialize the
terminal on the ERNEX Host.
OR
If you are not registered with ERNEX, select
No
.
12. The Idle screen appears.
The terminal is now ready to begin processing transactions.