RC6 novo
23
NOTE!
It must be ensured that no other belts in addition to
the belt that should be paired to the bike is active OR
that any other device (cell phone, bike computer, etc.)
that could connect to the belts are active during the
process!
Activate the belt by someone wearing it as instructed
and standing near the bike. Write
pulsemode 2
in the
terminal window to ensure that the bluetooth system
is active. Then let the the bike pair automatically
with the belt. Write repeatedly
pulseble
, and press
Enter
after each, in the terminal window until the
bike corresponds with the current pulse value, which
means that the belt is paired. Write
pulseble lock
to
lock to the active belt. With this the bike is locked
only against this belt and will ignore all others which
may be within reach. Write
pulsebleid
in the terminal
window and the bike will respond with the belt's
complete id. Note this on the belt together with which
bike the belt / transmitter unit is locked to for later
reference. To check what id which is locked to the
bike, type
pulsebleid
in the terminal window and the
bike responds.
Alternatively, if you already know the belt's complete
id, you can direct lock it. The complete ID has the
format ##: ##: ##: ##: ##: ##. Sometimes the device
ID is printed on the transmitter housing or packaging
but different types of abbreviated notation appear
on, for example Polar chest belts. There are many
free applications for BLE SMART HR which can be
used to see the belt ID in the cell phone or PC tablet.
Then you can lock directly to the belt without having
it active by typing the command
pulsebleid "##: ##:
##: ##: ##: ##
" in the terminal window and this will
register and lock to the specified id (note that it should
be " " around the id).
If you want to return to automatically pair with
the first compatible belt within reach, you write the
command
pulseble break
or
pulsemode 2
There is a risk that the "dedicated" belt may pair
with another device before it is paired to the bike if
the other device is within range (eg app in cell phone,
etc.). Therefore, we recommend that, if possible, all
devices with Bluetooth SMART are locked to specific
monitors so that this does not happen. If a heart rate
monitor has paired with the wrong device, turn it
off and let it lie for a while so it shuts itself down.
The time depends on the brand, but it usually varies
between 30 seconds and 2 minutes. Then the belt is
reset again. A belt can only pair with one device at a
time and it is often enough just to reach the electrodes
to make it active.
In environments where you want to change test
persons without wash and dry the belt first, you
can use so-called textile belts where the transmitter
unit sits with quick couplers on a fabric belt with
electrodes. Then you can use several textile belts but
only a transmitter unit per bike and change into dry
belts quickly by moving the transmitter unit which is
locked to the bike. The transmitter unit is often easy
to wipe clean. In this way you can maintain good
hygiene when the tests are close together.
Monark Exercise AB has tested several belts, both
of famous brands and so-called "no-name". As long
as they follow the
Bluetooth SMART
standard they
work on the bike, but we strongly recommend that
you use well-known brands such as Polar, because
"no-name" belts in many cases have been shown to
have both very poor function and range.
Содержание novo
Страница 1: ...MANUAL RC6 novo EN...
Страница 2: ......
