Monark novo, Руководство пользователя

Страница: 22 / 36

RC6 novo
22
The bike has a module that can connect to the
Bluetooth SMART compatible heart rate belts or
similar devices designed to this standard. The standard
includes no distance function so we recommend
different procedures depending on whether there is
only one heart rate monitor or there may be several
within the range of the receiver (10-15 m).
Connection to chest belt with solitary bike (pulse
mode 2) STANDARD
This works when you only have one bike with
Bluetooth SMART and other monitors with this
standard within the receiver range, normally 10-15
m.
The bike is set by default to automatically connect
temporarily with the first active heart rate monitor
with Bluetooth SMART technology that comes within
the range. The bike is paired with this monitor until
the signal is dropped. Heart rate monitors tend to stop
transmitting within 30 seconds to two minutes from
the time they lose pulse contact or have been taken
off. As soon as a signal is dropped, the bike begins to
search for another heart rate monitor (new or old).
You can use several heart rate monitors on the same
bike but it may only activate one monitor at a time
(within range).
Connection to heart rate monitor with several bikes
(pulse mode 3)
In a room with several bikes or other devices that also
use Bluetooth SMART heart rate monitors, every bike
should be locked to a specific heart rate monitor so
you have control of which is connected to which bike.
This can be done in Monark novo Display Unit (further
information in section "Monark novo Display Unit")
or in Monark test software or similar.
Open the terminal window. Ensure that you are
connected to the bike. Type
ping
in the command line
in the window and press
Enter
. Then the bike beep
once and answer
pong
in the text window above the
command line, see
Fig: Terminal window
.
Fig: Terminal window
Command
line
Bike answer
NOTE!
Electromagnetic waves can interfere with pulse
function when wireless chest belt or similar is used.
Cellular phones or similar are not allowed to be
used near the bike during test.
In case of problems, turn off WiFi, Bluetooth and
similar on computers nearby.
Connect Bluetooth SMART heart rate monitor
(Monark novo control unit)