Monark novo, Руководство пользователя

Страница: 7 / 36

1
3
2
1
2
3
4
RC6 novo
7
NOTE!
Before using the bike - remember to remove the
pendulum transport locking.
Settings / adjustments
Initial operation
RC6 novo is mechanically calibrated at the factory.
The user can always verify this by performing the
mechanical calibration of the pendulum. See section
"Calibration pendulum".
Apply power to the bike by first connecting the cable
from the power adaptor to the bike at the power
connector (3) at the right side of the bike, see
Fig:
Front cover right. Then plug the power adaptor into
the wall outlet. Turn on the power switch (1) and a
green LED lights up.
The cable from the power adaptor can be locked
with the clamp (3) which is placed below the power
connection.
Perform the electrical calibration as specified in
section "Calibration Electronics”. Test by pedalling
the bike. If the bike is working properly, it is ready
for use.
Fig: Front cover right
1) Power switch with LED
2) Power input
3) Locking for cable (power adaptor)
Recumbent settings
When you ride on the recumbent you should
adjust the distance to the pedals so that you get a
comfortable seating position. You can adjust the seat
longitudinally by lifting the lever on the right side and
push the seat forward / backward. Once you find the
correct position, release the lever and make sure it
locks (a click is heard).
To change the seat-back tilt, pull out the sprint to
the right and help with the other hand to change the
tilt. Once you find the correct position, release the
lever and make sure it locks (a click is heard). See
Fig:
Adjustments.
For easy entry and exit, the seat can rotate 90° and
be locked in this position. This is done by lifting the
lever (2), and keep it lifted, while you rotate the seat.
The seat can be locked in four different positions -
straight ahead, straight both sides and straight back.
When the seat is in position, release the lever and feel
that it locks.
Fig: Adjustments
Length adjustment of seat
1) Lift the lever. Move the seat forward /backward.
Rotating the seat
2) Lift the lever. Rotate the seat.
Adjustment of seat-back tilt
3) Pull out the sprint
4) Adjust the seat-back tilt