Monark novo, Руководство пользователя

Страница: 16 / 36

RC6 novo
16
If you press the symbol for unit a menu appears, "Set
unit", where you can change which workload unit
you want to use.
The workload unit you can choose is: l / min, kpm /
min, Watt, Newton and kp.
Rpm-independent - l / min (calculation, see
below)
- kpm/min
- Watt
kpm/
min
l/min Watt Newton kp
Locked
mode
Fig: Locked mode Current
rpm
Menu
Menu
Locked
mode
Workload control
Unit
Home
Calculation l / min:
Monark novo Display Unit uses a formula to calculate
VO
2
at different workloads.
This is according to Astrand's table between 150 W
and 300 W, and a good approximation for 15-700 W
and a cadence of about 50-65 rpm.
These values should only be seen as an indication
to meet Åstrand, for more information see current
literature!
Rpm-dependent - Newton
- kp
When you have chosen which workload unit you
want to use, the display returns to "Normal mode".
If you press "Home" the display returns to normal
mode without any changes.
If you press "Locked mode" in the view "Set unit"
you lock the display to show only the current rpm
instead of the current workload, see
Fig: Locked
mode
. You can also choose to display only the current
rpm with only a digit, see Fig: Locked mode, simple .
To cancel the "Locked mode", press the "Locked
mode" and then you will return to "Set unit". There
you can choose optional workload unit. When you
have chosen unit the display returns to normal mode.
If you are in the "Locked mode", press "Menu", you
can choose "Settings pulse" or "Settings general", see
further details under each title. .
You can always, even during training, change control
mode.
NOTE!
The text turns red when the set power not can
be reached with the current rpm with maximum
workload. Please reduce the workload level or
pedalling faster (increase rpm) until the text
turns white again.
Fig: Locked mode,
simple
Current
rpm
Menu
Locked
mode
Fig: Normal mode
Change
screen