Monacor WAP-202RS, Инструкция по эксплуатации

Страница: 28 / 32

28
Italiano
connected from the network), a question
mark will be added to their name in the
list. When such a server is selected and
called up, WAP-202RS will try to “wake
up” the server and to establish a connec -
tion. To remove servers with a question
mark from the list, call up the menu item
Prune servers
and then confirm the confirma -
tion prompt with
YES
.
4.4.3 Creating and replaying a
playlist
To replay specific titles from different
folders, a playlist with up to 500 titles
can be created. It is possible to mix ti -
tles from a UPnP-enabled unit (media
server) in the network and from a USB
storage device connected.
Note: The playlist will be deleted when the
unit is switched off with the mains switch
POWER, but will still be available when
the unit is switched to the standby mode.
1) To add a title to the playlist while it is
being replayed or when it has been
selected, keep the knob CONTROL
SELECT pressed until the following
message appears on the display:
Added to My playlist
To add all titles of a folder to the
playlist, select the folder and
keep the knob CONTROL SELECT
pressed until the message above
appears on the display. If the folder
includes subfolders, the titles of the
subfolders will also be added to the
playlist.
Note: The playlist does not provide any
folder structure; the titles will be added
to the playlist one after the other.
2) To replay the playlist, press the
button MENU (the menu shown in
fig. 41 will appear) and then use the
line
My playlist
to call up the list. The
first title will be selected. Press the
button CONTROL SELECT to start
the replay or first select a different
title to start with.
An overview of the operating
functions and displays can be found
in chapter 4.4.4.
3) To remove a title from the list, select
the title from the list and keep the knob
CONTROL SELECT pressed until
the following confirmation prompt
appears on the display:
Delete from My playlist?
Confirm with
YES
or cancel with
NO
.
4) To delete the entire playlist, press
the button MENU and then select
and call up
Clear My playlist
. A confir -
mation prompt will be shown on
the display; confirm the prompt to
delete the list.
4.4.4 Displays and functions
Music player
12:41
U S B
3:12 0:26
Come on my friends
The lower line of the display indicates
the source of replay (
USB
or
UPnP
). The
title name (or the title name and the
artist name for a
UPnP
source), the time
played of the title (numerically and by
means of a bar graph) and the total
playing time are shown.
Four replay modes are available:
– or not shown
All titles (of the current folder)* are
replayed one after the other.
– (“Shuffle”)
All titles (of the current folder)* are
replayed once in random order.
– (“Repeat”)
All titles (of the current folder)* are
continuously replayed one after the
other.
– and (“Shuffle” and “Repeat”)
All titles (of the current folder)* are
continuously replayed in random
order.
* if the title is included in a folder
(if the folder includes subfolders, the titles of
the subfolders will not be replayed)
To set the replay mode desired, use the
corresponding buttons (
➀
table, fig. 45)
or the menu items
Repeat Play
and
Shuf-
fle Play
in the highest menu level (fig.
41): Turn the knob CONTROL SELECT
to select the appropriate line and press
the knob to set the function to
On
or
Off
.
Button Function
INFO
press repeatedly to show
various title information
(if available)
REPEAT continuous replay
SHUFFLE replay in random order
PLAY pause / replay
at the unit only
PREV/ NEXT
press the button briefly to
go to the previous / next
title
keep the button pressed
for fast reverse / forward
on the remote control only
I

/

I

/

previous / next title
fast reverse / forward
Fig. 45 Functions of the music player
4.5 Replay of a Bluetooth
source
To replay audio files from a Bluetooth
source (e. g. smartphone or tablet
computer), press the button MODE re -
peatedly until
Bluetooth Audio
appears on
the display. Then the following menu
will appear:
Bluetooth
09:33
Bluetooth
Today s Date:
26/10/2019
The Bluetooth symbol in the lower
line will flash as long as there is no
Bluetooth connection.
Activate the Bluetooth function at
the Bluetooth source. In the list of the
units available, WAP-202RS will be
indicated by the name “BLUE”. Pair
the Bluetooth source with “BLUE” (
➀
refer to the manual instructions of the
Bluetooth source, if required). Once the
pairing has been made, the Bluetooth
symbol will stop flashing.
To control the replay (replay / pause,
previous / next title, fast reverse / for -
ward), either use the Bluetooth source
or the appropriate buttons at the unit
or on the remote control (
➀
function
overview of the buttons in fig. 45).
The functions available depend on the
Bluetooth source used.
4.6 Replay of an audio source
connected to the AUX input
To reproduce the sound of an audio
source connected to the jack AUX
INPUT, press the button MODE repeat -
edly until
Aux in
appears on the display.
Then the following menu will appear:
Auxiliary input
18:36
Audio In
Today s Date:
26/10/2019
4.7 Sleep timer function
The unit can automatically go to the
standby mode after an adjustable time