ModelCraft 20 72 54, Руководство пользователя

Страница: 82 / 202

80
3. Copying the Model Memory
• From within the main menu (see fig. 5) press the "ENTER" button, then you
can use the "+" or "-" buttons to select the "8:MODEL" function (fig 53).
• Then press the "ENTER" button again to reach the model menu (fig 59).
• Now, if necessary, select a model memory which you wish to copy, see section
"1. Select model memory".
• Use the "+" or "-" buttons to select the "CPY" function (see fig 60).
"SEL" = Select a model memory
"EDT" = Edit a model memory
"CPY" = Copy a model memory
• Then press the "ENTER" button, the target model name appears (see fig 61,
"Mod01").
• Set the target memory with the "+" and "-" buttons.
• Press the "ENTER" button, all the data of the target memory (in fig 61 the
memory is "Mod01") is overwritten with the data from the source memory (in
fig 61 the memory "Mod00"); the remote control is returned to the model
menu (fig 60).
All the previous settings saved in the target memory are lost in the
process! Make sure that the correct target memory is selected!
If you press the "EXIT" button, the memory will not be copied and you return
to the model menu (fig 60).
MODEL 11.2V
MDL.N: Mod00
SEL EDT CPY
Figure 59
MODEL 11.2V
MDL.N: Mod00
SEL EDT CPY
Figure 60
MODEL 11.2V
MDL.N: Mod00
CPY TO Mod01
SEL EDT CPY
Figure 61