Mobotix MOVE NVR-16, Руководство пользователя

Страница: 24 / 85

System User Interface Introduction
Camera PTZ Control
4. Click
to save the position. The recording icon will turn green , indicating this preset
point has been set.
5. To remove the preset point, select the preset point from the preset list. Then click
. The recorded pre-
set point will be cleared and the recording icon will turn grey.
Call Preset Points
Follow the steps to call preset points:
1. Click a camera channel that equips pan / tilt / zoom function.
2. Select a preset point number from the Preset Point List.
3. Click
to call the preset point. The selected camera will automatically move to the preset position.
Set Camera Tour Path
Follow the steps to set tour paths:
1. Click a camera channel that equips pan / tilt / zoom function.
2. Select a tour path number from the Tour Path list.
3. Click
to start recording the tour path.
4. Use the Direction Control Panel to pan / tilt the camera to set a tour path.
5. Click
to save the position.
Run Camera Tour Path
Follow the steps to run the recorded camera tour path:
1. Click a camera channel that a camera tour path is already set.
2. Select a Tour Path number from the Tour Path List.
3. Click
, and the camera will start touring as recorded.
4. Click Direction Control Panel to end the camera tour.
24 / 85