MKS MultiGas High-Speed Gas Sampling Cart
Maintenance
Replacing
the
filter
element
1.
Push in the handle of the filter holder and rotate counter clockwise (CCW) to disengage the
locking mechanism.
2.
Remove the filter assembly from the housing.
3.
Visually inspect the filter. If the filter is discolored or coated with particulate, replace the
filter element.
4.
Unscrew the Stainless screw end from the filter holder, and slide a new filter onto the filter
holder making sure to position the filter material properly.
5.
Replace the Stainless steel end cap and tighten down to hold the filter in place.
Installation and Use Manual 2011 APRIL 2 Rev. 1.5
33
