MJM Yachts LLC 40z, Руководство пользователя

Страница: 57 / 64

Chapter 12, Appendix, MJM 40z Owner’s Guide page 49
9.16 B
OSTON
B
OATWORKS
L
IMITED
W
ARRANTY
Manufacturer's Sole and Limited Warranty for
Pleasurecraft
A. General.
This document sets forth the sole
and limited warranty, which Boston BoatWorks,
LLC ("The Manufacturer") is giving you in
connection with the "Vessel" which you are
acquiring. It is the only warranty being given by the
Manufacturer and should be reviewed carefully
together with manuals and other instructional
material provided by the Manufacturer before you
take delivery of the Vessel.
B. Basic Warranty.
The Manufacturer warrants
that the Vessel (except for Excluded items
described below and when Properly Used, will be
free of defects in material and workmanship for a
period of twelve (12) months from delivery of the
Vessel to you by an Authorized Dealer. If you sell
the Vessel during this period, your buyer may
receive the benefit of the balance of the warranty
by agreeing to be bound by its terms.
c. Extended Warranty for Structure.
In
addition to the foregoing warranty, the
Manufacturer warrants that the stringer systems,
structural bulkheads and composite laminates of
the Vessel (except for Excluded items) and when
the Vessel is Properly *Used and Maintained, will
be free of defects in material and workmanship for
a period of five (5) years from delivery date by an
Authorized Dealer. This warranty may be
transferred to your buyer in the same manner as
the Basic Warranty. *Improper over-the-road
trucking of the vessel can cause local damage to
the centerline of the boat requiring a localized FRP
repair. Use authorized MJM trucking companies for
moving your boat or contact Boston Boat Works'
customer service managers for proper trucking
information PRIOR to engaging with another
trucking provider for boat transport.
D. Extended Warranty Against Osmotic
Blistering.
In addition to the foregoing warranties,
the Manufacturer warrants that any gelcoat
surfaces of the Vessel below the waterline won’t
blister when the Vessel is Properly Used for a
period often (10) years from delivery date by an
Authorized Dealer. This warranty may be
transferred to your buyer on the same manner as
the Basic Warranty.
E. Dealers.
The name and address of Authorized
Dealers is available from the Manufacturer. The
Manufacturer doesn’t authorize the Dealer, or any
other person, to assume for the Manufacturer any
liability in connection herewith or any liability or
expense incurred in the repairing of its products
other than those expressly authorized by the
Manufacturer in writing.
F. Excluded Items.
The Manufacturer gives no
warranty as to:
a. Paints, varnishes, gelcoats (except where
included in paragraph D above) exterior wood,
vinyls, fabrics, glass, chrome plating or anodized or
other finishes or surface coatings because of the
varying quality of these items manufactured by
others and the effect resulting from different
climactic and use conditions
b. Engines, mechanical equipment, pumps,
batteries, heating, plumbing, refrigeration,
electronic components, masts, or other
components manufactured by other than the
Manufacturer, or the cost of removal or re-
installment of the part and disassembly, or
reassembly of the unit of which it is a component.
c. All items not installed by the Manufacturer or
altered after their installation, and items installed or
altered by Authorized Dealers.
d. Other than upon first being delivered, leaks in or
around hatches, companionways, deck hardware
or other leaks which are above the waterline.
e. Damage to the Vessel (including, but not limited
to, wet core) caused by leakage around decks,
hardware or other accessories attached to, or
incorporated into, the Vessel.
f. Speed, fuel consumption or other performance
characteristics, because they are estimated and
not guaranteed.
G. Proper Use.
The warranties contained herein
are expressly conditioned upon your Proper Use of
the Vessel. This means that you must use the
Vessel solely as a pleasure craft (no commercial
use) and operate it as directed in and after
reviewing the manuals provided by the original
equipment manufacturer and the Manufacturer,
and perform maintenance to the Vessel as
recommended in the manuals and as required by
periodic inspections by an Authorized Dealer or
Service Center.