MJM Yachts LLC 40z, Руководство пользователя

Страница: 29 / 64

Chapter 5, Electrical Systems, MJM 40z Owner’s Guide page 21
5.7 T
HE
120V AC P
ANEL
The left side of the
120V AC
panel receives power from the
INVERTER/CHARGER
or from
SHORE 1
or from the Northern Lights
GENERATOR
. It includes breakers for loads that can be handled by the
HOUSE BATTERIES
inverted to 120V AC by the I
NVERTER/CHARGER
. (See
INVERTER/CHARGER,
page 25.)
When only one
SHORE POWER CABLE
is attached to
SHORE 1:
1. Turn on the charger function at the
INVERTER/CHARGER control panel
.
2. Push the slider down and turn on the
SHORE 1
breaker to supply
120V
AC
power to the circuit breakers on the left side of the
AC panel.
On the
right panel turn off SHORE 2 breaker, push the slide up and turn on the
The three buttons below the digital
readout select volts, amps or watts for
presentation on the digital display. The
TOGGLE switch selects which side of
the panel is reported in the digital
display. Information from the left side of
the panel is displayed in the up position,
and information from the right side of the
panel is displayed in the down position.
The PORT and STBD ENGINE BATTERY
switches are at the upper right of the AC
panel. Turning them on connects the
battery to engine starter motors. The
ENGINE EMERGENCY PARALLEL
switch combines the PORT and STBD
ENGINE BATTERIES. If the ACR
switches are closed (see page 38) the
ENGINE BATTERIES are also combined
with HOUSE BATTERIES.
The AUTO position is the same as off.
Notice the hinge at the bottom of each
panel. The marquee at the top of each
panel will pop off. There are screws that
may be removed so a qualified
electrician may hinge the panel down to
add a new circuit for a new device or
appliance at one of the SPARE
positions.
Custom labels are available from
customer service at Boston Boat Works.