MJM Yachts LLC 40z, Руководство пользователя

Страница: 42 / 64

Chapter 9 Finishes, Equipment, and Appliances MJM 40z Owner’s Guide page 34
There’s an intake seacock, R A W W A T E R strainer and pump located
in the systems room under the pilothouse. They should be checked
frequently and are the first things to check if the unit fails to deliver heat or
cooling.
Programming Procedure
There’s a wide range of options for controlling
the AC system. You can set it to heat mode, cool mode or automatic
mode; set it to cycle on and off for humidity control when the boat is
unused; control fan speeds, view service history and hour meter and set
many more options. For a full explanation of the options, controls and the
programing procedure, see the users manual.
Programmable Parameters
The default parameters may be changed.
Once new values are entered and memorized, the factory defaults are
overwritten and the new parameters become the default values. You can
restore the original factory default parameters manually. A summary of the
parameters, the permitted values and original factory default settings are
listed in Table 2, page 12 of the manual in the binders. When used with
optional electric heat, the fan remains on for four minutes after the heater
cycles off even if fan is set to cycled operation.
8.14 F
INISHES
Hull paint
The 40z hull is painted with Awlcraft 2000 color and three coats
of clear Awlcraft. Awlgrip states that while it doesn’t hurt to wax it, it doesn’t
help and can create a maintenance problem
.
The cabin deck and cabinetwork are finished in clear Awlgrip. See the
Awlgrip website for care and maintenance advice.
http://www.awlgrip.com
Corian
Instructions for maintaining Corian counter tops are in the binders
and at: http://www.dupont.com/products-and-services/construction-
materials/surface-design-materials/brands/corian-solid-
surfaces.html?src=gg-kg_surfaces-
us_corian&gclid=CP2jrr3Vx9ECFVg6gQod2AkK0g
Strataglass
Don’t use chemicals or brushes to clean; use only mild soap
and a sponge or a soft rag. If the curtains are scratched a mild polishing
compound (a white cream similar to what is used on Awlgrip) can be hand
applied to remove them. Test a small, unobtrusive area first. (See the
Strataglass Care and Maintenance website.)
http://www.strataglass.com/strataglass-care-and-maintenance
It’s best to leave the curtains in place, even when trucking. If they’re
removed, store them flat or rolled together with towels or paper between
layers. To avoid creases, don’t fold.
UltraLeather Upholstery
The standard UltraLeather upholstery is water
resistant, but don’t use chemicals or brushes to clean, only mild soap and
a sponge or a soft rag.
Stidd Seats
See http://stidd.com/support/ for maintenance
recommendations. The Stidd seats swivel and lower for a sociable setting.
Slide the seats forward before swiveling so the seat doesn’t jam into the
pilothouse walls.
Gull droppings on the hardtop that
drizzle down the side curtains after a rain
or heavy dew have an acid that can,
over time, etch the Strataglass curtains.
Be sure to clean
frequently . There is one
known instance with a 36z that was
moored in Chilmark on Martha’s
Vineyard.
…R.I.J.