Mitsubishi LaserVue L65-A90, Руководство пользователя

Страница: 14 / 96

14
TV Set-Up
Getting Started
Check the TV cabinet for damage. If there is
1.
damage, do not plug in the TV. Call Mitsubishi
Consumer Relations at (800) 332-2119.
Review the important safety, installation, and oper-
2.
ating information at the beginning of this book.
Choose a location for your TV.
3.
Allow at least four inches of space on all sides •
of the TV to help prevent overheating. Over-
heating may cause premature failure of the TV.
Avoid locations where light may reflect off the •
screen or where the TV is exposed to direct
sunlight.
See the stand and wall-mount requirements •
under “Installation and Operating Notes,” page
7 .
Remove the four transportation screws •
before final positioning of the TV. Keep the
screws in the storage bag provided and
reinstall them whenever moving the TV.
Install the batteries in the remote control. See
4.
page
31 for more on use of the remote control.
IMPORTANT
Do not plug the TV into a power outlet if there is
visible damage to the screen or cabinet.
Plug your TV into a power outlet. The blue power
5.
LED on the front of the TV will start blinking rapidly.
After the blue LED stops blinking, press the
POWER
key to power on the TV.
When the
6.
Welcome screen appears the first time
you power on the TV, select a language for TV
menus. You can later change the language through
the
Setup menu.
Connect your audio/video (A/V) devices to the TV
7.
and perform initial setup.
See the following pages for initial TV setup and •
use of the Auto Input Sensing feature.
See chapter 3, “TV Connections,” for connec- •
tion diagrams.
G uidelines for Setting Up and Using Your New Widescreen TV
2
Installing the R emote Control
Batteries
Remove the remote control’s back cover by 1.
gently pressing in the tab and lifting off the
cover.
Load the batteries, making sure the polarities 2.
(+) and (-) are correct. For best results, insert
the negative (-) end first.
Snap the cover back in place. 3.
2
1
The remote
control requires
two AA alkaline
batteries.
Turning the TV On or Off
To turn the TV on or off, point the remote control
at the front of the TV and press the
POWER key.
Alternatively, press the POWER button on the TV’s
control panel.
When You First Power On the TV
Choosing a Language for Menus
Power on the TV for the first time. 1.
Press 2. to select either English or Spanish
for all menus. You can later change the lan-
guage selection through the
Setup > Lan-
guage menu. See page 46 .