Mitsubishi MOTORS Eclipse Cross 2019 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 602

Mitsubishi MOTORS Eclipse Cross 2019 Скачать руководство пользователя страница 38

Keys

The key fits all locks.

Keyless entry key

Keyless operation key

1- Keyless entry key
2- Keyless operation key
3- Emergency key

WARNING

l

When taking a key on flights, do not press
any  switches  on  the  key  while  on  the
plane. If a switch is pressed on the plane,
the  key  emits  electromagnetic  waves,
which  could  adversely  affect  the  plane’s
flight operation.
When carrying a key in a bag, be careful
that  no  switches  on  the  key  can  be  easily
pressed by mistake.

NOTE

l

The key (except for the emergency key) is a
precision electronic part with a built-in sig-
nal transmitter. Please observe the following
in order to prevent a malfunction.

•

Do not leave in a place that is exposed to
direct sunlight, for example on the dash-
board.

•

Do not disassemble or modify.

•

Do not excessively bend the key or sub-
ject it to strong impacts.

•

Do not expose to water.

•

Keep away from magnetic key rings.

•

Keep away from audio systems, personal
computers, TVs, and other equipment that
generates a magnetic field.

•

Keep away from devices that emit strong
electromagnetic waves, such as cellular
phones, wireless devices and high fre-
quency equipment (including medical de-
vices).

NOTE

•

Do not clean with ultrasonic cleaners or
similar equipment.

•

Do not leave the key where it may be ex-
posed to high temperature or high humidi-
ty.

l

The  engine  is  designed  so  that  it  will  not
start  if  the  ID  code  registered  in  the  immo-
bilizer  computer  and  the  key’s  ID  code  do
not match. Refer to the “Electronic immobil-
izer” section for details and key usage.

l

[For vehicles equipped with the security
alarm system]
Pay attention to the following if the security
alarm is set to “Active”.
Refer to “Security alarm system*” on page
3-23.

•

If  the  security  alarm  is  in  the  system
armed  mode,  the  alarm  will  sound  if  the
doors  are  opened  after  being  unlocked
with  the  key,  the  inside  lock  knob  or  the
central door lock switch.

•

Even if the security alarm is set to “Ac-
tive”, the system preparation mode is not
entered if the keyless entry system or the
keyless operation function was not used to
lock the vehicle.

Key number tag

The key number is stamped on the tag as in-
dicated in the illustration.

Keys

3-02

OGKE20E1

Locking and unlocking

3

«
...
36
37
38
39
40
...
»

Содержание Eclipse Cross 2019



























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов