Mitsubishi MOTORS Eclipse Cross 2019, Руководство пользователя, Страница: 174 / 602

Sensor is too hot or cold
If the system becomes temporarily unavaila-
ble due to a high or low temperature of the
sensor, the following warning display will
appear.
After the temperature of the sensor has been
in range, the system will automatically return
to operation.
If the warning display does not disappear af-
ter waiting for a while, there is a possibility
that the automatic high-beam system has a
malfunction. Contact a MITSUBISHI
MOTORS Authorized Service Point for in-
spection of the system.
Windscreen is dirty
If the AHB determines that its performance
has been degraded, the warning display will
appear.
This can occur when:
l Foreign objects, such as dirt, snow or
ice, adhere to the windscreen of the sen-
sor portion.
l
In adverse weather conditions, such as
rain, snow, sandstorms, etc.
l A vehicle in front or an oncoming vehi-
cle is splashing water, snow or dirt.
When the sensor performance returns, the
AHB will resume operation.
If the warning display does not disappear af-
ter waiting for a while, there is a possibility
that the sensor has a malfunction. Contact a
MITSUBISHI MOTORS Authorized Service
Point for inspection of the sensor.
Welcome light
This function turns on the position and tail
lamps for approximately 30 seconds after the
UNLOCK switch on the key is pressed when
the combination headlamps and dipper switch
is in the “AUTO” position. The welcome
light function will operate only when it is
dark outside the vehicle.
NOTE
l While the welcome light function is operat-
ing, perform one of the following operations
to cancel the function.
• Press the LOCK switch on the key.
NOTE
• Turn the combination headlamps and dip-
per switch to the “
” or “ ” position.
• Turn the ignition switch to the “ON” posi-
tion or put the operation mode in ON.
l It is possible to modify functions as follows:
• The headlamps can be set to come on in
the low beam setting.
• The welcome light function can be deacti-
vated.
For further information, please contact your
MITSUBISHI MOTORS Authorized Serv-
ice Point.
On vehicles equipped with the Smartphone
Link Display Audio or the MITSUBISHI
Multi-Communication System (MMCS),
screen operations can be used to make the
adjustment. Refer to the separate owner’s
manual for details.
Coming home light
This function turns on the headlamps in the
low beam setting for approximately 30 sec-
onds after the ignition switch is turned to the
“LOCK” position or the operation mode is
put in OFF.
1. Turn the combination headlamps and
dipper switch to the “AUTO” position.
2. Turn the ignition switch to the “LOCK”
position or put the operation mode in
OFF. Also, if a key was used to start the
engine, remove the key from the ignition
switch.
Combination headlamps and dipper switch
5-62
OGKE20E1
Instruments and controls
5