Mitsubishi MOTORS Eclipse Cross 2019 Скачать руководство пользователя страница 129 | Manualshive

Страница: 129 / 602

Mitsubishi MOTORS Eclipse Cross 2019 Скачать руководство пользователя страница 129

Then, press the switch to switch to the
setting selection screen.

3. Press the switch or switch to select

the units, and then press the switch to
confirm the setting.
The setting is changed to the selected
temperature unit.

NOTE

l

The temperature value on the air condition-
ing panel is switched in conjunction with the
outside temperature display unit of the mul-
ti-information display.
However, “°C” or “°F” are not shown on the
temperature display of the air conditioner.

NOTE

l

On

vehicles

equipped

with

the

MITSUBISHI  Multi-Communication  Sys-
tem  (MMCS),  the  temperature  value  of  the
air  conditioning  screen  is  switched  in  con-
junction  with  the  outside  temperature  dis-
play unit of the multi-information display.
However, “°C” or “°F” are not shown to the
air conditioning screen.

Changing the display language

The language of the multi-information dis-
play can be switched.

1. Switch to the function setting screen.

Refer to “Changing the function set-
tings” on page 5-13.

2. Press the switch or switch several

times to switch to the “LANGUAGE”
screen.
Then, press the switch to switch to the
setting selection screen.

3. Press the switch or switch to select

the desired language, and then press the

switch to confirm the setting.

The setting is changed to the selected
language.

NOTE

l

If “---” is selected in the language setting, a
warning message is not displayed when
there is a warning display or interrupt dis-
play.

Changing the language cooper-
ative control

The language used in MITSUBISHI Multi-
Communication System (MMCS) (if so
equipped), the Bluetooth

®

2.0 interface (if so

equipped), Multi Around Monitor (if so
equipped) or Head Up Display (HUD) (if so
equipped) can be changed automatically to
the same language as that shown in the multi-
information display.
Bluetooth

®

is a registered trademark of

BLUETOOTH SIG, INC.

1. Switch to the function setting screen.

Refer to “Changing the function set-
tings” on page 5-13.

2. Press the switch or switch several

times to switch to the “LANGUAGE

Multi-information display

5-17

OGKE20E1

Instruments and controls

5

«
...
127
128
129
130
131
...
»

Содержание Eclipse Cross 2019



























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов