Mitsubishi MOTORS Eclipse Cross 2019, Руководство пользователя

Страница: 283 / 602

When the ignition switch is turned to the
“ON” position or the operation mode is put in
ON, the FCM will turn back on.
NOTE
l
The indicator is combined with the “Ul-
trasonic misacceleration Mitigation System
OFF” indicator.
To change alarm timing
Give a short press to the FCM and Ultrasonic
misacceleration Mitigation System (UMS)*
ON/OFF switch to change the timing at
which the frontal collision alarm is triggered.
Every time you press the switch, the alarm
timing changes from three levels (FAR, MID-
DLE or NEAR).
As you make selection, the selected alarm
timing is displayed on the information screen
of the multi-information display. Even after
turning off the FCM, turning the ignition
switch to the “LOCK” position or putting the
operation mode in OFF, the system retains
your last selected alarm timing in memory.
Distance mode: FAR
Distance mode: MIDDLE
Distance mode: NEAR
CAUTION
l For the FCM brake prefill, the FCM brake
assist and the FCM braking functions, the
function triggering timing cannot be
changed.
System problem warning
If a problem occurs with the system, a visual
warning specific to the type of the problem is
given together with an audible alarm.
When the camera and radar
cannot detect accurately
When the FCM system determines that it
cannot detect objects properly, the FCM will
become inoperative.
This can occur when:
l In adverse weather conditions, such as
rain, snow or sand storms, etc.
l Foreign objects, such as dirt, snow or
ice, adhere to the windscreen of the sen-
sor portion or the surface of the sensor.
l A vehicle in front or an oncoming vehi-
cle is splashing water, snow or dirt.
l Driving on a nonbusy road with a few
vehicles and obstacles in front. (Type 2
only)
The following message will appear on the in-
formation screen of the multi-information
display and the indicator will come on in
the instrument cluster.
or
Forward Collision Mitigation system (FCM)*
6-97
OGKE20E1
Starting and driving
6