Mitsubishi MOTORS Eclipse Cross 2019 Скачать руководство пользователя страница 365 | Manualshive

Страница: 365 / 602

Mitsubishi MOTORS Eclipse Cross 2019 Скачать руководство пользователя страница 365

NOTE

l

When selecting PTY, select the PTY to reg-
ister, and hold down any of the keys from
the 1RPT key to the 6

key to register the

PTY as a preset.

l

While in PTY select status, if there is no op-
eration for 2 seconds, then an upwards
search within the selected PTY will start.

Listening to Traffic
Messages

This explains how to listen to traffic messag-
es.

To Listen to Traffic Messages

1. When not in MW or LW mode, press the

TP key.
If traffic messages are being broadcast,
these are received.

CAUTION

l

When receiving a MW or LW signal, traffic
messages cannot be received.

NOTE

l

Receiving traffic messages will indicate
“TRAF INF” on the display, and if text in-
formation can be received, the station name
is displayed.

NOTE

l

If  traffic  messages  are  received,  then  this
will  switch  to  the  volume  of  the  previously
received  traffic  messages  or  emergency
broadcasts. The volume when receiving traf-
fic messages or emergency broadcasts is that
at  which  subsequent  broadcasts  will  be  re-
ceived.

Traffic Message Standby Mode

When the broadcast of traffic messages starts,
this automatically switches to the station that
is broadcasting traffic messages.

1. When not in MW or LW mode, press the

TP key.
“TP” is indicated on the display, and the
product switches to standby mode.
If traffic messages are being broadcast,
these are received.

2. When not in MW or LW mode, press the

TP key.
“TP” disappears from the display, and
standby mode will be cancelled.

CAUTION

l

When receiving a MW or LW signal, traffic
message standby mode will be cancelled.

Listening to CDs

This explains how to listen to audio CDs
(CD-DA/CD-TEXT).

Play CDs

Insert the disc.
Insert a disc to automatically start playback.
→ “Insert/Eject Discs” on page 7-31
If a disc is already within the product, press
the MEDIA key to switch to CD as the
source.

Select the Track

Press the

key or

key to select the

track.
This enables selection of the next or previous
track.

Fast Forward or Rewind

Hold down the 3

key or the 4

key.

Fast forward/rewind is possible.

Switching Playback Mode

Repeat playback, random playback, and scan
playback are possible.

Repeat Playback (RPT)

Press the 1RPT key.

Listening to Traffic Messages

7-37

OGKE20E1

For pleasant driving

7

«
...
363
364
365
366
367
...
»

Содержание Eclipse Cross 2019



























































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов