Mitsubishi MOTORS Eclipse Cross 2019, Руководство пользователя

Страница: 285 / 602

If the display keeps showing the message,
there is a possibility that the FCM has a mal-
function.
Contact a MITSUBISHI MOTORS Author-
ized Service Point.
NOTE
l
If the sensor or its surrounding area reaches
an extremely high temperature when parking
the vehicle under a blazing sun, the “FCM
SERVICE REQUIRED” message may ap-
pear.
After the temperature of the sensor or its sur-
rounding area has been in range, if the mes-
sage remains even after restarting the en-
gine, please contact a MITSUBISHI
MOTORS Authorized Service Point.
Handling of the sensor
The sensor (A) is located inside the wind-
screen and front bumper (Type 2 only) as
shown in the illustration.
The sensor is shared in the following sys-
tems:
l Forward Collision Mitigation system
(FCM)*
l Lane Departure Warning (LDW)*
l Automatic High-Beam (AHB)*
l
Adaptive Cruise Control System
(ACC)*
l Traffic Sign Recognition (TSR)*
Type 1
Type 2
CAUTION
l
To maintain proper performance of the
FCM, LDW, AHB, ACC and TSR;
• Always keep the area around the sensor
clean.
If the inside of the windscreen where the
sensor is installed becomes dirty or fog-
ged, contact a MITSUBISHI MOTORS
Authorized Service Point.
• Do not apply an impact or load on the
sensor or its surrounding area.
• Do not put anything including a sticker or
film to the outer side of the windscreen in
front of or surrounding area of the sensor.
Also, do not put anything including a
sticker or film to the inner side of the
windscreen under the sensor.
• Do not attempt to detach or disassemble
the sensor and sensor mounting screw.
• The sensor front cover should not be
modified or painted.
• Do not cover the sensor mounted area
with a licence plate or anything such as a
grill guard, etc. (Type 2 only)
Forward Collision Mitigation system (FCM)*
6-99
OGKE20E1
Starting and driving
6