Mitsubishi MOTORS Eclipse Cross 2019, Руководство пользователя, Страница: 245 / 602

The brake auto hold indication lamp in the
instrument cluster will come on while the
system activates.
CAUTION
l
Release the brake pedal after the brake auto
hold indication lamp is illuminated.
NOTE
l In the following situations, the brake auto
hold system may not operate temporarily.
• The vehicle is stopped on a slippery road.
• The vehicle was stopped while the steer-
ing wheel was turned all the way to the
left or right.
• The vehicle is being turned on a parking
lot turntable.
If this occurs, the brake auto hold system
will return to the normal operation if you de-
press the accelerator pedal and the vehicle
starts moving again.
NOTE
l
If the following operation is performed, the
brake auto hold will be deactivated and the
brake auto hold indication lamp in the in-
strument cluster goes off.
• When shifting the selector lever to the “P”
(Park) or “R” (Reverse) position with de-
pressing the brake pedal.
• When the Electric parking brake is ap-
plied by using the Electric parking brake
switch.
l While the vehicle is held stationary with the
brake auto hold system, the Electric parking
brake will be automatically applied under
the following conditions, and a buzzer will
sound and the message will appear on the in-
formation screen in the multi-information
display.
• After approximately 10 minutes have
elapsed while applying the brake auto
hold system.
• When the driver’s seat belt is unfastened.
• When the driver’s door is opened.
• When the ignition switch is turned to the
“LOCK” position or the operation mode
is put in OFF.
NOTE
• When the system detects the vehicle slid-
ing down a slope.
If the Electric parking brake cannot be ap-
plied automatically due to the system mal-
function, the message will appear on the
information screen in the multi informa-
tion display. Depress the brake pedal.
Brake auto hold*
6-59
OGKE20E1
Starting and driving
6