EN-27
IMAGE menu (continued)
•
When the setting of COLOR ENHANCER or 3D is changed, the displayed image may be disturbed.
•
When the COMPUTER1, COMPUTER2 or HDMI is selected as the input source, COLOR and TINT can’t be adjusted.
•
TINT is available only when the NTSC signal is input.
•
INPUT LEVEL is unavailable when the digital signal is supplied from the YC
B
C
R
/YP
B
P
R
terminal of the connected device.
•
Captions are not displayed while information about the menu or input signal selection is being displayed on the screen.
•
The closed caption function displays text information included in the NTSC signal, which is mainly used for TV broadcasting in
North America.
INSTALLATION menu
ITEM
SETTING
FUNCTION
ADVANCED MENU
ENTER
The ADVANCED MENU is displayed for the following settings.
INPUT LEVEL
AUTO /NORMAL/
ENHANCED
For HDMI signal input:
AUTO: The proper setting is automatically selected.
NORMAL: Select when grayish black occurs.
ENHANCED: Select when solid black occurs.
(See page 15.)
CLOSED CAPTION OFF
Does not display captions.
CC1 / CC2 / CC3 /CC4
/ T1 / T2
Displays captions.
ITEM
SETTING
FUNCTION
LAMP MODE
STANDARD
Select this option when you want to view images in a well-lit room.
LOW
Select this option to moderate the intensity of the lamp. The operating sound is
reduced and the lamp lifetime becomes longer.
•
When this mode is switched, projector images may flicker.
•
If this mode is frequently switched, the lamp may be deteriorated.
STANDBY MODE
STANDARD
Select this option when you control the projector via the LAN terminal during
power standby. Audio is output from the AUDIO OUT terminal. Video signal is
output from the MONITOR OUT terminal.
LAN
Select this option when you control the projector via the LAN terminal during
power standby.
LOW
Select this option when you don’t control the projector via the LAN terminal
during power standby. This option disables the LAN terminal and reduces the
power consumption during the power standby.
AUTO POWER ON
OFF / ON
When ON is chosen, the projector turns on automatically when the power cord
is plugged in the wall outlet.
•
When the lamp is off, the projector is in standby. Use the remote control to
turn on the lamp.
