EN-22
- VIDEO ONLY:
Signals supplied from video devices only are
displayed at 16:9.
To cancel the menu:
6. Press the MENU button.
Important:
•
When a 16:9 image is kept displayed for a long time
before displaying 4:3 image, the afterimages of the
black bars may appear on the 4:3 image screen.
Consult your dealer in this case.
When connecting to a laptop
computer:
When the projector is connected to a laptop computer,
images may not be projected in some cases. In such
cases, set the computer so that it can output signals
externally. The setting procedure varies depending on
the type of the computer. See the instruction manual of
your computer.
Example of the setting procedure for
external output
Press the [Fn] key and any of the keys [F1] to [F12] at
the same time. (The key to be pressed depends on the
type of the computer you use.)
Setting of the resolution
If the resolution of the computer doesn’t match with
that of the projector, projected images may be
obscured. Ensure that their resolutions are the same
(see page 60). For the method to change the output
resolution of the computer, contact the manufacturer of
the computer.
Watching 3D content
You can enjoy 3D content with this projector.
In order to watch 3D content, you need to have the
following items:
•
3D images inputted from a computer, DVD player,
Blu-ray player, etc.
•
DLP™ Link™ active 3D glasses
Important:
•
Some 3D glasses may not work with this projector.
Ask the dealer for details.
This projector supports the following 3D image formats:
•
Frame packing:
The format which transmits the images maintaining
the original resolution including the signals for right
and left.
•
Side by side:
The format which displays the images with the half
of the original resolution for the left eye and the right
eye side-by-side in one frame.
•
Top and bottom:
The format which displays the images with the half
of the original resolution for the left eye and the right
eye at the top and bottom in one frame.
•
Frame sequential (Field sequential):
The format which displays alternately the images for
the left eye and the right eye.
For details about the supported 3D image signal
formats, see "3D supported signal" on page 61.
To view 3D images:
Preparation:
•
Switching the 3D mode (such as 3D setting system)
of the player may be required when projecting 3D
images from the player supporting 3D display. Read
the user manual of the player for details.
1. Project a 3D image on the screen inputted from a
computer, DVD player, or Blu-ray player.
2. Display the IMAGE menu. (See page 25 for menu
settings.)
3. Press the
S
or
T
button to select 3D.
4. Press the
W
or
X
button to select ON
.
5. Press the ENTER button.
6. Press the
S
or
T
button to select 3D FORMAT.
7. Press the
W
or
X
button to select the setting
appropriate for the input signal and press the ENTER
button.
• AUTO
(for HDMI input only):
Select this setting normally when 3D images are
inputted from the HDMI terminal. (3D images are
displayed automatically when the input signal
includes the 3D identification signal.)
• SIDE BY SIDE
:
Select this setting when 3D images are inputted in
the side by side format.
• TOP AND BOTTOM
:
Select this setting when 3D images are inputted in
the top and bottom format.
• FRAME SEQUENTIAL
Select this setting when 3D images are inputted in
the frame sequential format.
8. Turn the power switch on the 3D glasses to ON and
wear the 3D glasses.
R
L
DLP™ Projector
The shutter timing of the 3D
glasses is controlled by
being synchronized with
switching of right and left
3D image which is detected
by the sensor of glasses.
DLP
™
Link
™
active
3D glasses
Sensor
Frame sequential
(Field sequential)
Top and bottom
Frame packing
Side by side
L
R
L
R
L
R
L
R
L
R
3D image format
