EN-30
SIGNAL menu
ITEM
SETTING
FUNCTION
MEMORY CALL
AUTO / MEMORY 1
-
MEMORY 8
Use to select the setting of RESOLUTION (MEMORIZE) already saved.
Impossible to select if no setting has been saved. AUTO is selected by
default. It optimizes the signal format automatically depending on the type
of video signal supplied from the computer. Press the ENTER button to clear
the setting already saved.
RESOLUTION
(MEMORIZE)
The current resolution is displayed. To change the current setting, press the
ENTER button to display the RESOLUTION (MEMORIZE) menu. The new
setting can be saved to MEMORY 1 - MEMORY 8.
VERTICAL
FREQUENCY
-
The vertical frequency of the currently projected video signal is displayed.
HORIZONTAL
FREQUENCY
-
The horizontal frequency of the currently projected video signal is displayed.
HORIZ. PIXELS
640-1920
The number of horizontal pixels of the currently projected video signal is
displayed. When you change the current setting, select EXECUTE, and then
press the ENTER button, the image is automatically adjusted according to
the resolution you set. The adjustment result can be saved to MEMORY 1 -
MEMORY 8.
VERT. LINES
360-1200
The number of vertical lines of the currently projected video signal is
displayed. When you change the current setting, select EXECUTE, and then
press the ENTER button, the image is automatically adjusted according to
the resolution you set. The adjustment result can be saved to MEMORY 1 -
MEMORY 8.
EXECUTE
OK
Press the ENTER button to start the automatic adjustment. At the
completion of the automatic adjustment, a message is displayed and you
can save the adjustment result to MEMORY 1 - MEMORY 8.
CANCEL
OK
The process to change the current resolution is canceled and the SIGNAL
menu is displayed.
HORIZ. POSITION
0-999
Use to adjust the horizontal position of the projected image.
VERT. POSITION
0-999
Use to adjust the vertical position of the projected image.
FINE SYNC.
0-31
Use to eliminate flickering or blur, if appears, viewing the projected image.
TRACKING
0-2800
Use to eliminate vertical wide stripes, if appears, viewing the projected
image.
COMPUTER INPUT
AUTO
The proper setting is automatically selected.
RGB
Select this option when connecting the projector to high definition video
equipment having R, G, and B output terminals.
YC
B
C
R
/YP
B
P
R
Select this option when connecting the projector to a DVD player or other
device having Y, C
B
, and C
R
(or Y, P
B
, and P
R
) component video output
terminals.
OVER SCAN
100%-90%
Use to adjust the display area of projected image.
HOLD
OFF / ON
Use to adjust the image when flagging occurs near the top of the screen.
