EN-16
Pro Computer
For computer with Mini D-SUB
For analog connection:
1. Connect one end of the supplied computer cable to the COMPUTER/COMPONENT VIDEO IN terminal (1, 2) of the
projector.
2. Connect the other end of the computer cable to the monitor port of the computer.
For monitor connection:
Connect the computer cable from the monitor to the MONITOR OUT terminal of the projector.
•
Images may not be displayed correctly depending on the type of the input signal. See the instruction manual of the
monitor.
•
Signals are coming from the COMPUTER/COMPONENT VIDEO IN-1 terminal of the projector.
•
When the STANDBY MODE in the INSTALLATION menu is set to STANDARD the MONITOR OUT terminal outputs
signals during standby mode.
Important:
•
When you use a longer computer cable instead of the provided cable, the image may not be projected correctly.
•
Some computers require additional connectors or analog RGB output adapters to be connected with this projector.
Contact your dealer for further information.
•
This projector uses stereo mini jack for its audio input. Check the type of the audio output terminal of the
connected computer and prepare a proper cable for connection. Some computers don’t have the audio output
terminal.
•
Speaker output is mono.
•
When the audio cable is connected to the AUDIO OUT terminal, the speaker output is muted.
•
The audio output can be available during power standby.
For Mac computers
•
If your Mac computer has no video port, a monitor output adapter is required. Contact your dealer for further
information.
•
Some Mac computers require a MAC adapter for the computer cable for connection with this projector. Contact
your dealer for further information.
About DDC
The COMPUTER/COMPONENT VIDEO IN terminals (1,2) of this projector comply with the DDC 1/2B standard. When
a computer supporting this standard is connected to this terminal, the computer will automatically load the information
from this projector and prepare for output of appropriate images.
•
After connecting a computer supporting this standard to this terminal, plug the power cord of the projector in the
wall outlet first, and then boot up the computer.
Computer cable
COMPUTER IN
AUDIO IN
AUDIO OUT
Audio cable (option)
Computer cable
(option)
Necessary when outputting to both a PC
monitor and the projector.
MONITOR OUT
To monitor port
