- 2 -
1. Specifi cations
(1) PWFY-P100VM-E-BU
Product Specifi cations
II
Model
Power source
kW
Heating capacity
*1
*1
*1
kcal / h
(Nominal )
BTU / h
kW
A
W.B
dB<A>
mm(in.)
mm(in.)
mm(in.)
mm(in.)
mm(in.)
mm
in.
kg(lb)
kW
-
Power input
Liquid
Gas
Current input
Outdoor temp.
Inlet Water temp.
-
Circulating Water temp.
Total capacity
Temp. range of
heating
Connectable
outdoor unit
/heat source unit
Model / Quantity
Sound pressure level (measured in anechoic room)
Diameter of
refrigerant pipe
Diameter of
water pipe
Field drain pipe size
External finish
External dimension H × W × D
Net weight
Compressor
Maker
Type
Starting method
Motor output
Circulating water
Range
Protection on Internal circuit
(R134a)
High pressure protection
Inverter circuit (COMP)
Compressor
Type × original charge
Refrigerant
Control
R410a
Design pressure
R134a
Water
External
Drawing
Standard attachment
Optional parts
Remark
Note:
*1 Nominal heating conditions (PWFY conditions are indicated in the parentheses.)
<PURY-series>
Outdoor Temp. : 7°CDB/6°CWB (45°FDB / 43°FWB)
kcal
= kW × 860
Pipe length : 7.5 m (24-9/16 ft)
BTU/h = kW × 3,412
Level difference : 0 m (0 ft)
cfm = m
3
/min x 35.31
(Inlet water Temp 65°C Water flow rate 2.15 m
3
/h)
<PQRY-series>
Circulating water Temp. : 20°C (68°F)
Pipe length : 7.5 m (24-9/16 ft)
Level difference : 0 m (0 ft)
(Inlet water Temp 65°C Water flow rate 2.15 m
3
/h)
lb
= kg / 0.4536
* Due to continuing improvement, the above specifications may be subject to change without notice.
* Install the unit in an environment where the
wet bulb Temp. will not exceed 32°C.
* The unit is not designed for outside installations.
* Please don't use the steel material for the water piping material.
* The water circuit must use the closed circuit.
* Please do not use it as a drinking water.
* Please always make water circulate or add the brine to the circulation water when the ambient temperature becomes 0°C or less.
* Please always make water circulate or pull out the circulation water completely when not using it.
* Please do not use groundwater and well water.
* The specification data is subject
to rounding variation.
Unit converter
Lubricant
Operation volume
Inlet
Outlet
Accessory
Wiring
Document
m
3
/h
MPa
MPa
MPa
1.00
Installation Manual, Instruction Book
800 (785 without legs) × 450 × 300
WKE94C229
Inverter
1.0
Over-heat protection, Over-current protection
R134a × 1.1kg (0.50lb)
10,800
12.5
WKB94L762
NONE
44
NO
Strainer, Heat insulation material, 2 × Connector sets
PWFY-P100VM-E-BU
1-phase 220-230-240V 50/60Hz
PT3/4 Screw
MITSUBISHI ELECTRIC CORPORATION
NEO22
Φ32 (1-1/4'')
Inverter rotary hermetic compressor
31-1/2" (30-15/16" without legs) × 17-3/4” × 11-13/16”
60 (133)
PT3/4 Screw
11.63 - 11.12 - 10.66
50~100% of outdoor unit/heat source unit capacity
PURY-(E)P
•
Y(S)JM-A(1)(-BS)
PQRY-P
•
Y(S)HM-A
Φ15.88 (Φ5/8") Brazed
-20~32°C (-4~90°F) PURY-series
10~45°C (50~113°F) PQRY-series
Φ9.52 (Φ3/8") Brazed
42,700
10~70°C (50~158°F)
2.48
0.6~2.15
LEV
4.15
High pressure sensor, High pressure switch at 3.60 MPa (601 psi)
Discharge thermo protection, Over-current protection
3.60
Details on foundation work, duct work, insulation work, electrical wiring, power source switch, and
other items shall be referred to the Installation Manual.
